Screws for Latches

950-0012.1

Price excludes GST

$3.00

Packet of 100 Screws for Latches

M3.5 x 16mm

Top Entrance with Entry Guard

950-0049

Price excludes GST

$7.00

The bee hives with top entrances usually outperform other bee hives in two ways:

There is less brood chamber congestion from honey.
More surplus honey is stored in the honey supers.

This product incorporates an innovative entrance 120mm wide with a landing board. It comes with an entry guard included. If required, it can be fitted vertically to guard against wasps or inserted horizontally to block the entry when the bee hive is shifted.

Can be used on any standard 10 frame Langstroth bee hive.

Weight: 0.3 Kg

Top quality food-grade polypropylene construction.

Rim thickness: 10mm

Please note:- Stock colours may be different to yellow as shown in the photo below.

V-Gate Division Board

790-0011-FE-SVG-W

Price excludes GST

$19.80

Top Quality Division Board assembled in NZ — designed for splitting, merging, upper entrances, and optional V-Gate vaporization access.

This NZ-assembled division board is built with a strong wooden rim and durable plywood board. It can be used as a division board, merge board or hive mat depending on your hive management setup.

Use to separate hive sections or provide a dedicated upper entrance when required. Choose from dipped or undipped, front entry, side entry, no V-Gate, front V-Gate or side V-Gate options.

Preorder now — stock due August

This product is available for preorder, with stock due in August.

Preorder now to secure your preferred configuration, including dipped or undipped finish, entry position and V-Gate position.

V-Gate option — vaporizing application made easy

The optional V-Gate Vaporizing port is a dedicated access point built into the division board rim for easier, cleaner and more consistent oxalic acid vaporizing application.

Instead of pushing a vaporizer through timber or using temporary access points, the V-Gate uses a metal-on-metal plate design to help reduce wear, maintain better nozzle alignment and make repeat treatments faster and more reliable.

Dedicated vaporizing port A purpose-built access point for vaporizing directly into the hive without altering the brood box.
Better vaporizing placement Applies vaporizing into the empty cavity above the brood nest, helping achieve excellent coverage through the brood nest.
Ideal with ventilated floors Vapour enters from above the colony rather than escaping out through bottom vents.
Metal-on-metal design Helps reduce wear from repeated vaporizer use and avoids oval timber entry points that can affect nozzle alignment.
Helps prevent nozzle chill Reduces the cooling effect caused by cold, wet wood, helping prevent blockages and allowing more applications before cleaning is required.
Front or side access Choose the V-Gate position that best suits your hive setup and treatment workflow.

V-Gate product video

Common uses

Hive splits Allows a hive to be divided into separate upper and lower sections when managing splits or queen work.
Winter top vent Can be used to provide a top vent over winter to reduce condensation issues.
Optional entry point Choose no entry, front entry or side entry depending on whether the upper section needs its own flight entrance.
Hive space management Helps close off or manage space within the hive, making it useful for smaller colonies or seasonal management.
Requeening support Useful when isolating parts of a colony or managing temporary queen-right and queenless sections.
Seasonal flexibility A versatile board for beekeepers who want one product that can support multiple hive management tasks.

Divider board construction

Assembly	Assembled in NZ.
Size	507mm x 407mm.
Frame	21mm thick wooden frame with 40mm x 8mm entry.
Board	4mm plywood.
Rim material	The rim is made from Russian Pine — very strong and durable.
Edges	Radiused outer edges for comfortable handling.
Corner assembly	Each corner has one pancake head stainless screw for a secure assembly.
Carton quantity	15 per carton.

Options

Finish

Dipped — the wooden rim has been dipped in hot micro-crystalline wax prior to assembly, making it far more durable and longer lasting.

Undipped — the Russian Pine rim is left in its natural untreated state.

Entry position

Front Entry — includes a front entrance cut-out for upper-hive access.

Side Entry — includes a side entrance cut-out for upper-hive access.

V-Gate position

Front V-Gate — fitted with the V-Gate vapour port on the front of the divider board.

Side V-Gate — fitted with the V-Gate vapour port on the side of the divider board.

Choosing a layout

Choose the entry and V-Gate positions that best suit your hive setup, yard layout and treatment workflow.

For example, a front entry is ideal when the upper section should fly from the front, while a side entry can help keep entrances separated during split management.

Important option note: Front Entry cannot be selected with Front V-Gate, and Side Entry cannot be selected with Side V-Gate. Choose opposite positions if both an entry and V-Gate are required.

V-Gate Hive Mat

790-0011-FVG-W

Price excludes GST

$19.20

Top Quality Hive Mat assembled in NZ — now available with V-Gate.

This NZ-assembled hive mat is built with a 21mm thick wooden rim and durable 4mm plywood centre board. Choose the standard version, or upgrade to the new V-Gate vapour port for easier, cleaner and more consistent oxalic acid vaporization.

The V-Gate is a dedicated vaporizing access point built into the 21mm rim. Instead of pushing a vaporizer through timber or using temporary access points, the V-Gate uses a metal-on-metal plate design to help reduce wear, maintain better nozzle alignment and make repeat treatments faster and more reliable.

It is recommended to drill a 10mm hole in the lid to align with the V-Gate so that the lid does not need to be removed for vapour applications.

Pre-order now

Stock due August.

This product is currently available for pre-order. Orders placed now will be supplied once stock arrives in August.

Product video

Why choose V-Gate?

Dedicated vapour port A purpose-built access point for vaporizing directly into the hive without altering the brood box.
Better vapour placement Applies vapour into the empty cavity above the brood nest, helping achieve excellent coverage through the brood nest.
Ideal with ventilated floors Vapour enters from above the colony rather than escaping out through bottom vents.
Metal-on-metal design Helps reduce wear from repeated vaporizer use and avoids oval timber entry points that can affect nozzle alignment.
Helps prevent nozzle chill Reduces the cooling effect caused by cold, wet wood, helping prevent blockages and allowing more applications before cleaning is required.
Front or side access Choose the port position that best suits your hive setup and treatment workflow.

Hive mat construction

Assembly	Assembled in NZ.
Size	507mm x 407mm.
Frame	21mm thick wooden frame.
Board	4mm plywood.
Carton quantity	15 per carton.
Rim material	The rim is made from Russian Pine — very strong and durable.
Edges	Radiused outer edges for comfortable handling.
Corner assembly	Each corner has one pancake head stainless screw for a secure assembly.

Options

Rim

Treated — the wooden rim has been dipped in hot micro-crystalline wax prior to assembly, making it far more durable and longer lasting.

Untreated — the Russian Pine rim is left in its natural untreated state.

V-Gate position

V-Gate Front — fitted with the V-Gate vapour port on the front of the hive mat for front access during treatment.

V-Gate Side — fitted with the V-Gate vapour port on the side of the hive mat for side access during treatment.

White Beekeepers Gumboots

705-10-12

Price excludes GST

$70.00

Excellent for Beekeepers. White does not attract the bees or the heat from the sun.

The standard height supplied is 400mm.

These gumboots are designed to be trimmed down to your preferred height if required. When cut down to 180mm high, they breathe very well and greatly reduce any sweating.

Check out all these great features & benefits:-
a) Top Quality 100% NZ made for NZ conditions.
b) Certified to AS / NZS 2210.3:2009
c) Wide comfortable fitting with soft leg.
d) Broad Natural toe design.
e) Reinforced protective density at the heel, toe, calf and ankle.
f) Kick off lug at the back.
g) Comfort moisture absorbing lining.
h) Oil & acid resistant sole.
i) Multi directional grip & slip resistance.
j) Superior liquid dispersion.
k) Self-cleaning tread.
l) Cushioned comfort insole.

The sizing of these boots is quite large.
Please check the measurements below before ordering.

Maximum Internal Length of Boot (mm):-
Size 3 - 245
Size 4 - 255
Size 5 - 265
Size 6 - 275
Size 7 - 285
Size 8 - 290
Size 9 - 300
Size 10 - 310
Size 11 - 320
Size 12 - 328
Size 13 - 338
Size 14 - 345

Example:-

For feet that are 263mm long (maximum), size 6 suits best when worn with one pair of thin socks.