Entrances

The RobberGards™ is an ingenious device to fool wasps and robber bees and stop them from getting into the colony.

These unwanted visitors are guided to potential food in the hive largely by sense of smell.

They go straight to the vent holes at bottom of the RobberGards™and try to get in, without realizing the entrance is at the top.

These intruders very soon give up and go looking for food elsewhere.

The bees learn within 24 hours how to access their own hive and it doesn’t stop them carrying out all their normal duties.

Eye Screws to secure the RobberGards to brood box can be PURCHASED HERE

Click Here to see how to fit them to 4 different types of floors

See what “A Kiwi Beeman” thinks about RobberGards Here

Varroa mite re-invasion

This is a huge issue in Autumn and it is believed to be the largest contributor to colony losses.

The varroa mite re-invasion is a result of visits from robber bees and/or from social bee visits.

This was highlighted at the 2021 NZ Bee Conference by an excellent study done by Dr Dennis vanEngelsdorp and shown in this video:-

https://youtu.be/PvWZjwUbLfA?t=1671 

Watch content from 27 min to 33 min. (Remember the study was done in Autumn in USA.)

The RobberGard is especially designed to deter these robber bees and social bees.

Some of the features and benefits of the RobberGards:-

1. The registered design is made from high quality stainless steel to withstand the corrosive elements outside and last for a very long time, virtually indefinitely.
2. Deters robber bees that want to steal the food supplies inside.
3. Deters social bees from other colonies that want to come and have a look and will mostly spread varroa mites.
4. Deters wasps from robbing food from the colony.
5. Stops mice getting in and damaging the honey combs.
6. Helps to control spread of AFB disease. If a colony gets AFB and has this robber guard, it is far less likely to get robbed out and spread the disease, before the beekeeper finds it and burns it.
7. Allows a lot more ventilation over winter (in hives with solid bases) to reduce condensation in the hives which is detrimental to the health of the colony.
8. Easy to block up with foam rubber if the beehive has to be shifted. The bees can still get lots of ventilation through the robber guard vent holes.
9. Very easy to mount, switch entries or remove with the use of the stainless steel eye screws supplied by Beequip NZ.
10. Has a summer position or rotate 180 degrees for the robbing season and winter. The entrance is just 25mm wide in this setting.
11. One of the 3 sizes will fit virtually every type of beehive base (floor) that is commonly used in NZ.

These can also be used as:

• Mouse guards
• Wasp Guards
• Anti-wasp screens
• Anti-robbing screens
• Robber Guards

Units packed in a carton:

RobberGard 153 - 200 / Carton
RobberGard 225 - 150 / Carton
RobberGard 360 - 100 / Carton

Pricing is per individual unit.

Beehive entrance reducer.

Also protects against Mice and Bumble Bees.

Can be reversed 180 degrees to block the entrance.

We recommend using eyelets to secure them to the brood box.

The product code for the eyelets is 750-0582.1

A very useful accessory that can be attached to most types of Nucleus beehives. Some features and benefits are:-

• The integral landing board makes it easier for the bees to return into the hive.
• The landing board can be clicked shut when shifting the hive. Includes vent holes.
• Mouse proof.
• A huge range of colour combinations to reduce risk of the queen returning to the wrong hive.
• Simple to mount using the 4 screw holes. (Screws not included)
• A plastic plate is included and can be slid into position if required. Stainless ones available here

This entry has been used very successfully on the Technosetbee Q8 Queen Mating Nucleus Hive for several years.

Outer dimensions:- 55mm wide x 57mm high x 12mm deep.

Spigot dimensions:- 29.4mm diameter, 22.5mm deep.

Manufactured from high quality food grade polypropylene. 

Price is for one entrance assembly only.

Please note:- Stock colours may be different to the photos shown and come as a random mix.

Galvanised entrance disc for Nucleus hives. 

Available in two sizes: 68 & 125mm

The 125mm is most common and has three settings:-

• Fully open with 44mm diameter entry.
• Open with queen excluder slots only.
• Closed with small holes as vents.

The 68mm has the following details:

• Fully open with 24mm diameter entry
• Queen excluder entry 24mm wide
• Two closed positions with vents

Volume discounts available. Please tell us what quantity you require and the freight address and we can give you our best quote. Click here to contact us now.

Stops mice and greatly reduces wasp damage. One hole is large enough to allow Drone movements.

They can be slid out and rotated 180 degrees without moving the Super to lock the bees inside while shifting the hive.

Come as a pair. Click on Vented Floor for more info.

Manufactured from high quality food grade polypropylene.

Please note:-

Each Technosetbee floor is supplied with a pair of entry guards included.

Stock colours may be different to the photos shown.