Fully Functional Bee Escape Boards in NZ

BEE ESCAPE BOARD.

With 2 galv steel corner bee escape plates fitted.

This has two options:

Treated: The wooden rim has been wax dipped in Microcrystalline wax. this will preserve the timber increasing its longevity. 

Untreated: The wooden rim is in its natural state and untreated

15 per carton.

Get your bees out of the honey super quicker than before...

With 4 galv corner bee escape plates, it gives them optimum exit options and speeds up the process.

The rim is made from Russian Pine timber and the Hardboard is oil tempered both sides.

This has few options:

Treated: The wooden rim has been wax dipped in Microcrystalline wax. this will preserve the timber increasing its longevity. 

Untreated: The wooden rim is in its natural state and untreated

21mm: Standard hive mat thickness

40mm: thicker rim to allow space under the board for bees to go into if it is a full hive.

BEE ESCAPE BOARD. With 8-way Bee Escape Disc fitted.

This has two options:

Treated: The sturdy Russian Pine wooden rim has been wax dipped in hot Microcrystalline wax. This will preserve the timber increasing its longevity. 

Untreated: The wooden rim is in its natural state and untreated.

15 per carton.

This Bee Escape board is an excellent way to clear out the honey super before the harvest. Place the board between the brood chamber and honey super. Allow up to 24 hours for bees to vacate and then remove.

Ensure the worker bees have some empty space to move into.

This escape board is designed for Technoset Supers but can be used on standard wooden supers if 2 plastic lugs are removed on the top surface, on one side. (An angle grinder will skim them off in a few seconds) See the photo with dimensions on it.

Features:

- Two valves with 4 outlets in each for increased performance and safety.

- Very unlikely to block.

- Very sturdy long-life construction.

- Weight:1.39 Kg

-Manufactured from high quality food grade polypropylene.

Please note:- Stock colours may be different to the photos shown.

The Bee Escape cover makes stray bee removal during the honey harvest very easy and fast.

Designed to be used on top of stacked honey supers after they are removed from the hive and while travelling back to the extraction plant.

The semi-transparent valve on top allows the ambient light to pass through and attract any bees still left inside. Most bees will exit within 15 minutes before transporting the honey supers.

Can be used on wooden honey supers also.

NB. These covers will not prevent robbing.

Manufactured from high quality food grade polypropylene. Weight: 1.350 Kg

Outer Dimensions: 52cm x 42cm

Please note:- Stock colours may be different to the photo shown.

8 way bee escape disc. Attach to a hive mat with a 50mm hole in centre. Place mat under honey supers ensuring that there is enough empty space below for all the bees to go down into. Within 24 to 48 hours most bees will have left the honey supers via the 8 way escape disc. Very efficient and won't block up.

Volume discounts available. Please tell us what quantity you require and the freight address and we can give you our best quote. Click here to contact us now.

Metal Corner Bee Escapes ready to fit to your hive mat.

Recommended hole size to drill when fitting these to your hive mats is 40mm

We all know how hard bees make it to get supers apart! Their propolis and wax sticks everything together like its glue. Getting supers apart can prove a challenging task. but not anymore with Beequip's latest release - The Box Cracker™!

After many Beekeepers requesting a tool to help with harvesting honey, we have developed the Box Cracker™. This is a tool that will make breaking honey boxes apart so much easier, and not only that, we made a Escape Tool to match it so you can put a bee escape on without even lifting the honey supers off.

It can be quickly adjusted to suit 6 different lift heights

Go to the Box Cracker™ Escape Tool Here

Check out the action video below!

Made in house from top quality materials and protected by a durable power coating.
This tool is built to last and will save you or your team hours of back breaking work.

Using this alongside the Box Cracker™ Tool, you have the ability to put bee escapes on your hive without even taking your honey supers off!

Takes up to 40mm thick Bee Escapes

Check out the video below which shows it in use.

Made inhouse from top quality materials and protected with a durable powder coating.
This tool is built to last and will save you or your team hours of back breaking work.

The box cracker and the escape tool make an amazing pair. Both tools used together will help you harvest honey quicker than before.

Find out more about the Box Cracker here

Find out more about the Escape tool here

Check out the video to see them in action: