Comb Honey

Everything you need to make one frame of rectangle shape comb honey.

This Package Includes:
1 x Frame to hold containers
12 x Containers and lids
14 x Pieces of wax cut to suit

See video HERE on how to fit the wax to the containers

The frame splits in half to enable fitting the 12 small comb honey containers. Special clips keep it together while it is in the beehive.

240mm deep plus 3mm top & bottom for central clips.

Allow 41mm width per frame.

Stock arriving on the 22nd of September - Your order will be dispatched after this date.

Everything you need to make one full depth box of rectangle shape comb honey. There is only 7 frames for a full depth package as we recommend putting a frame of honey on the outsides of the 7 frames to draw the bees up into the frames and make them start drawing it out. 

This Package Includes:
7 x Frames to hold the containers
84 x Containers and lids
90 x Pieces of wax cut to suit

See video HERE on how to fit the wax to the containers

The frame splits in half to enable fitting the 12 small comb honey containers. Special clips keep it together while it is in the beehive.

240mm deep plus 3mm top & bottom for central clips.

Allow 41mm width per frame.

Everything you need to make one frame of heart shape comb honey apart from the beeswax to brush on the containers.

This Package Includes:
1 x Frame to hold containers
16 x Containers and lids - (containers will need wax brushing on them)
4 x Spacer Screws

The spacer screws are to be screwed into the four corners of one side on each frame so that the frames self space and give an even finish on the honeycomb.

When the containers need to be removed, simply insert a screw driver in the holes on the top and bottom of the frame.

233mm deep. Allow 40mm width per frame. 

You can buy Raw Beeswax here to coat them.

Wooden Section Package 28

This package consists of:-

1 x Half depth super, assembled. Not treated.

7 x 4-section frames, assembled with plywood separators attached.

28 x wooden sections, flat packed.

28 x thin super wax sheets to suit the sections.

Eco Friendly packaging to suit the wooden sections can be purchased here.

Checkout the full instruction guide here

Wooden Section Package 21

This package consists of:-

1 x Half depth super, assembled. Not treated.

7 x 3-section frames, assembled with plywood separators attached.

21 x wooden sections, flat packed.

21 x thin super wax sheets to suit the sections.

Eco Friendly packaging to suit the wooden sections can be purchased here.

Checkout the full instruction guide here

Everything you need to make one full depth box of heart shape comb honey apart from the beeswax to brush on the containers.

This Package Includes:
7 x Frames to hold the containers
112 x Containers and lids - (containers will need wax brushing on them)
28 x spacer screws

There is only 7 frames for a full depth package as we recommend putting a frame of honey on the outsides of the 7 frames to draw the bees up into the frames and make them start drawing it out. 

The spacer screws are to be screwed into the four corners of one side on each frame so that the frames self space and give an even finish on the honeycomb.

When the containers need to be removed, simply insert a screw driver in the holes on the top and bottom of the frame.

233mm deep. Allow 40mm width per frame. 

You can buy Raw Beeswax here to coat them.