Comb Honey

Everything you need to make one frame of rectangle shape comb honey.

This Package Includes:
1 x Frame to hold containers
12 x Containers and lids
14 x Pieces of wax cut to suit

See video HERE on how to fit the wax to the containers

The frame splits in half to enable fitting the 12 small comb honey containers. Special clips keep it together while it is in the beehive.

240mm deep plus 3mm top & bottom for central clips.

Allow 41mm width per frame.

Everything you need to make one full depth box of rectangle shape comb honey. There is only 7 frames for a full depth package as we recommend putting a frame of honey on the outsides of the 7 frames to draw the bees up into the frames and make them start drawing it out. 

This Package Includes:
7 x Frames to hold the containers
84 x Containers and lids
90 x Pieces of wax cut to suit

See video HERE on how to fit the wax to the containers

The frame splits in half to enable fitting the 12 small comb honey containers. Special clips keep it together while it is in the beehive.

240mm deep plus 3mm top & bottom for central clips.

Allow 41mm width per frame.

Wooden Section Package 28

This package consists of:-

1 x Half depth super, assembled. Not treated.

7 x 4-section frames, assembled with plywood separators attached.

28 x wooden sections, flat packed.

28 x thin super wax sheets to suit the sections.

Eco Friendly packaging to suit the wooden sections can be purchased here.

Checkout the full instruction guide here

Made in NZ - No fumigation on import!

Flat packed ready to fold into shape.

Soften the crease with water and then fold into shape

Has a small slot to insert thin super foundation

Dimensions are 108mm square and 45mm wide.

Eco-friendly packaging available here

Cardboard cartons to suit the sections available here

Kitsets frames to take 3 sections or 4 sections available here

Precut thin super foundation available here

Checkout the full instruction guide here

Kitset frames made to suit the wooden comb honey sections.

Fit in a Standard 1/2 Depth Box

4 section Frame - Fits 4 wooden sections. Fit maximum sections per frame.

Frames come with 4mm thick ply separator sheet to ensure the bees build the comb to uniform levels.

7 frames can be fitted per standard half depth super.

Alternatively you can use 5 of these section frames plus 3 standard Hoffman frames.

It is a good idea to draw out some standard Hoffman frames first then place them on outsides of the Super as bait frames to get the bees working in the super real quick.

Filler block are available on request if you want to do just 3 sections per frame rather than four. This can have been results in some cases.

1/2 depth boxes available in NZ Pine and Russian Pine

Technosetbee Full Depth #2 Frame for Comb Honey Production:

This new revolutionary frame is designed for comb honey production. The beekeeper simply cuts a sheet of wax foundation into two pieces as shown in the photos and inserts each piece through an opening in the top of the frame. (One small offcut is not required.) The two squares are 203mm x 195mm each. A plastic capping locks it into place.

The Thin Super wax foundation can be purchased already cut to the correct size here.

When honey is capped, simply slice with an electric knife or a hot knife into the desired sizes. 

Each of the 4 rectangles (or windows) in the frame are 184mm high. The 2 outer rectangles are 88mm wide. the 2 inner rectangles are 97mm wide. If the comb is cut to 105mm long to suit the larger square containers, the comb honey will weigh between 300g and 340g, depending on thickness. 

Cut-comb honey containers are available here. Cut the honey comb up to suit the container sizes.

Manufactured from high quality food grade polypropylene.  End bars are 36mm wide. 10 frames will fit snugly per box. Alternatively you could fit 9 frames per box and space them evenly to produce thicker slabs of comb honey.

Comb Honey is very much sought after and sells for very high prices. These frames make the job so much easier and more efficient.

Frame net weight: 0.35 Kg

Caution! Do not use these frames in areas where the bees could collect poisonous Tutin. 

In NZ tutin zones, any honey harvested after 31st Dec must be tutin tested. When the honey is cut from the frames, the honey dribbles from every cut must be collected, blended and a sample sent to an authorised laboratory for tutin testing before the honey is sold or given away.

Tutin can potentially be collected anywhere by the bees above the latitude line of 42 degrees south in NZ. (Where the Passion Vine Hoppers live)

The ideal tool to make your comb honey cutting easy 

Get the perfect size every time.

Its made from stainless and cuts a 10cm square to suit our cut comb containers.

Honey capacity approx. 250g.

Thin Super beeswax foundation is required. 96mm x 64mm. Click here to order. The wax sheets need to be ""welded"" in place. Heat up some pure beeswax in a slow cooker or a crock pot and a apply a thin bead of molten wax on the edges.

12 of these fit into a special full depth frame. Click here to order.

The bees make the natural comb honey in the same container that it is sold in. Simply add a cap top and bottom, apply sticky label to seal and it is ready to sell. No mess or cutting required.

Caution! Do not use these frames in areas where the bees could collect poisonous Tutin during the months of January to May. For more info, click on the links below.

Tutu plant info

Tutin regulations

Transparent Heart-shape Honey Box with plastic foundation base and printed lid for Comb Honey.

Dimensions: 112mm x 108mm x 23mm high

Honey capacity approx. 100g.

A beeswax coating is required on the hexagonal embossed base.

16 of these fit into a special full depth frame. Click here to order.

Caution! Do not use these frames in areas where the bees could collect poisonous Tutin during the months of January to May. For more info, click on the links below.

Tutu plant info

Tutin regulations

You can buy Raw Beeswax here to coat them.

Full Depth Comb Honey Frame to take 12 small Honey Containers. Click here for more info.

The frame splits in half to enable fitting the 12 small comb honey containers. Special clips keep it together while it is in the beehive.

240mm deep plus 3mm top & bottom for central clips.

Use a Technoset excluder to get the bee space needed under the full depth super.

If more than one Super is used with these Comb Honey Frames, use a Technoset Top Entry for the extra space required.

Allow 41mm width per frame. Fit 8 frames per Super.

Cut Comb container.

White with clear lid. Per each or per carton.

Two sizes to chose from:

110mm x 110mm x 40mm - Holds Approximately 340 Grams

Comes in cartons of 245

75mm x 75mm x 35mm - Holds Approximately 150 Grams

Comes in cartons of 305

This is for enough wax foundation to suit one of our special comb honey containers. Click here for more info.

All of the beeswax used for this comb foundation is first heated to approximately 110 degrees Celsius before being micro filtered to remove all dross and moisture.  This ensures that when you buy our comb foundation, it is sterilised and you are only paying for pure beeswax. Because of its purity, it is not attacked by wax moths.

Thin Super Foundation for Large Comb Honey Container - 132mm x 89mm

Sheet Size: 203 x 195mm

This is for one sheet only. Two sheets required per Technoset comb honey frame.

Please contact us for carton prices.

Approximately 765 Sheets fit in a carton.

The Technoset No.2 Comb Honey Frames can be viewed here.

All of the beeswax used for this comb foundation is first heated to approximately 110 degrees Celsius before being micro filtered to remove all dross and moisture. This ensures that when you buy our comb foundation, you are only paying for pure beeswax.

The filtered liquid beeswax then passes to the Weed Process sheeting machine.  This converts the beeswax from a liquid state into a continuous flat sheet and is one of the secrets of making high quality comb foundation.  During this process, the beeswax gains greatly in elasticity and strength to the point where a piece of cold comb foundation can be scrunched up and then flattened out again without breaking.

The rolls of sheet then pass to the automatic milling machine. The pure beeswax sheet passes between two precision engraved rollers which imprint the pattern onto the beeswax. The continuous sheet is then cut to size. 

Throughout the process, stringent quality control checks are continuously carried out. The life of our Comb Foundation is indefinite if stored in proper packaging and in dry conditions. Because of its purity, it is not attacked by wax moths.

66m roll x 12mm wide. 12 rolls per bag

These gusseted Cellophane bags are our Eco friendly solution for packaging the Wooden Sections. Pair well with our cardboard cartons to suit.

They can be sealed then heated to shrink down to a tidy package.

They Measure 19 micron thick and 110x55x265mm

Pack of 50 Bags