Vaporizer Accessories

Replacement Dispenser for the InstantVap

Adjustable from 1 to 4 gram dose rates.

Suits all the styles

Check out our InstantVap Operational Guide for more info

This silicone cap is used for cleaning the InstantVap

Steam Cleaning
After rinsing it out, start heating it up to 200 C. While its heating up get the cleaning cup as shown in the picture above. Fill it 3/4 full of water. Once the InstantVap gets to 200C, tip it upside down without the plunger in the spout. Slide the cleaning cap over the spout, then holding it firmly in place with 2-3 fingers, tip the machine up the right way with the nozzle point away from yourself or anyone else. The water in the cap will drop down into the chamber, instantly evaporate and steam out the nozzle. This will generate a bit of pressure on the cap so ensure your wearing gloves and holding it down tight!

Check out our InstantVap Operational Guide for more info

This silicone cover placed over the spout of the InstantVap can help to optimize the performance of the device. By covering the hot box at the top of the InstantVap, this cover aids in reducing heat loss, as well as containing any acid spills from the plunger.

Check out our InstantVap Operational Guide for more info

These sleeves protect your hiveware from the hot nozzle on the InstantVap.

Essential when working with Plastic or Polystyrene hiveware.

Also help to insulate the nozzle and avoid blockages

5 Pieces Supplied

Check out our InstantVap Operational Guide for more info

These slide over the nozzle & block any accidental vapor leakage e.g. during transport.
Alternatively, cut off the end and use as a heavy duty sleeve on polyhives

Check out our InstantVap Operational Guide for more info

Oxalic Acid Dihydrate Crystals. 99.5% 

Oxalic Acid is used by many different industries for many different applications.

• Beekeepers.
• Exterior timber deep cleaning and preparation.
• Commercial laundries. Rust and mineral deposit remover on fabric.
• Building and construction cleaning. Mineral staining, grout, mortar, bricks, tiles, pavers.
• Professional carpet cleaning. Rust and mineral stain removal.
• Rust, scale and watermark removal from baths, basins and other washroom surfaces.
• Hardwood stain removal on concrete and carpet
• Waterlines and deposits on boat hulls and marine applications

Many beekeepers use Oxalic Acid with our Vaporizers

We also sell Glycerine and cardboard or paper strips

500g pottles, 2kg pottles or 25kg Bags

Ensure to reading safety instructions before opening container.

Click here to view our mixing guide for oxalic acid and glycerine

Check out our packages here, with everything you need to get started including Oxalic Acid

Get full face protection with this comfortable and safe face-mask.
This will give you the best face & lung protection when using a Vaporizer with Oxalic Acid.

This mask will also give very good face & lung protection when working with Formic Acid.

This is a complete kit including a pair of Organic Vapour / Acid Gas Cartridges to suit.
Also included is a pair of FOGSTOP optix wipes and a handy container to store the mask and keep it clean.
You can get spare filter cartridges here.

NOTE: The service life of any acid gas cartridge filter is affected by many factors.

Replace both the filters: -

• When the expiry date stamped on the sealed packet has elapsed.
• Once opened, maximum use time is 6 months (even if not used). The carbon will absorb contaminants from the general environment.
• When contaminant can be detected by smell or taste.

Comes in Medium and Large - both are adult size, the large has slightly more room in the mask.

Silicone material
Reusable
Anti fog treatment on lens
Anti scratch lens
Low breathing resistance
High filtration efficiency filters
Protects against airborne contaminants

The Masks are tested and approved to meet the following standards:

Certified AS/NZS 1716:2012
Certified CE Standard EN143:2000 P3 R
Certified CE Standard EN14387:2004+A1:2008
Certified CE Standard EN149:2001+A1:2009
Certified CE Standard EN143:2000 P2 R

Protect yourself with this Half-Face Respirator Mask.

This will give you the best lung protection when using a Vaporizer with Oxalic Acid. Some form of eye protection should also be worn.

This mask will also give very good lung protection when working with Formic Acid.

This is a complete kit including a pair of Organic Vapour / Acid Gas Cartridges to suit. Also included is a handy container to store the mask and keep it clean.
You can get spare filter cartridges here.

Comes in Medium and Large - both are adult size, the large has slightly more room in the mask.

Silicone material
Reusable
Low breathing resistance
High filtration efficiency filters
Protects against airborne contaminants

The Masks are tested and approved to meet the following standards:

Certified AS/NZS 1716:2012
Certified CE Standard EN143:2000 P3 R
Certified CE Standard EN14387:2004+A1:2008
Certified CE Standard EN149:2001+A1:2009
Certified CE Standard EN143:2000 P2 R

NOTE: The service life of any acid gas cartridge filter is affected by many factors.

Replace both the filters: -

• When the expiry date stamped on the sealed packet has elapsed.
• Once opened, maximum use time is 6 months (even if not used). The carbon will absorb contaminants from the general environment.
• When contaminant can be detected by smell or taste.

This is a pair of Cartridges to suit our Half and Full Face  Respiratory Masks
They are specifically for protecting you against Organic Acid Vapour or Acid Gas - Perfect for Vaporising Oxalic Acid or using with Formic Acid

The service life of any acid gas cartridge filter is affected by many factors.

Replace both the filters: -

• When the expiry date stamped on the sealed packet has elapsed.
• Once opened, maximum use time is 6 months (even if not used). The carbon will absorb contaminants from the general environment.
• When contaminant can be detected by smell or taste.

Meet standards and approvals AS/NZS 1716:2012

Makita BL1860 18V 6.0Ah LXT Lithium-Ion Battery

This battery is perfect for the Makita Version of the InstantVap.
6AH will give you a rough total of treating 40-50 Hives with a 2 gram dose. (Includes the heat up time)

Check out our Automotive Charger for these batteries here 
Single and Dual Wall chargers also available  

100% genuine Makita battery!

For efficient Varroa Mite control in beehives when using Oxalic Acid for treatment.

Check out our Blog Post on Brood Breaks in Hives

Two size options available:
- Full Depth
- 3/4 Depth

Oxalic acid treatments do not usually kill the mites that are inside capped brood cells. There is now a very efficient and effective solution!

Lock the queen in this cage to create a brood break period. Treat the hive with Oxalic Acid while there is no capped brood and achieve a very high Varroa kill rate.

See Data Sheet of testing done on this

Oxalic acid can be applied by vaporization, fogging or by the dribble method.

Check this link for more info:-

http://scientificbeekeeping.com/oxalic-acid-questions-answers-and-more-questions-part-1-of-2-parts/

Due to its large size the bees don't feel queenless and are less likely to build queen cells. It has queen excluder sides so that nurse bees can still enter the cage and care for the queen.

There is a large opening under the top cap to release the bees when required. Only 25mm wide at the top and will fit in a standard brood box along with 10 frames with 33mm end bars. The main body of the frame is only 16mm wide so as not to interfere with brood emerging alongside.

The bottom edge is curved on the full depth cage to match the typical shape of the winter cluster.

There are many other applications.

In warmer locations, the queen can be locked up over winter to stop her laying eggs to conserve stores and to stop the Varroa mites from breeding.

Can also be used to bank an extra queen over winter when running 2 queen colonies and the bees are already familiar with 2 queens in the hive.

We recommend that clients add a small piece of wood as shown, if using the cage over winter. The wood is naturally the warmest material for the queen to rest on, while being surrounded by nurse bees.

The suggested wood dimensions as shown, are 20mm x 10mm x 110mm long.
(Tip: - The bottom bar on a beehive frame is often 20mm x 10mm section.)
Wood at 10mm thick is a firm fit, but we still recommend that one or 2 screws are fitted to keep it secure and in the best place. The top cap unclips to allow easy access for the strip of wood.

The top bar is 480mm long. Cage height is 228mm for full depth brood boxes and 175mm high for 3/4 depth.

Top quality product made in Europe from food grade polypropylene.

Stock supplied may be a different colour to what is shown in the photos.

Sealed Battery - Either 7Ah or 18Ah Available

Not for Commercial Vaporizing - Commercial Vaporizer available here

The 7ah Will do approximately 10 vapour sessions successfully (2min each) before it should be recharged. The 18ah will do 20-30 2min sessions before needing a recharge.

Click Here to buy the Vaporizer

Click Here to buy a Battery Charger for these batteries.

1 amp 12 volt battery charger.

For charging the battery that you can use with the Vaporizer.

DC18RC Fast Charging Battery Charger by Makita – the practical solution for powering your Li-Ion batteries.

Fast Charging: Charges our 6.0Ah Makita batteries in just 55 minutes 

Built-In CPU: The charger's CPU optimizes charging by reading the battery's memory chip, prolonging battery life.

Efficient Cooling: The forced air cooling fan minimizes charging time by maintaining the ideal battery temperature.

Digital Power Display: Monitor battery and charging status with the digital display for informed usage.

240 Volt Model: This charger is a 240-volt model with C-Tick compliance for versatility.

Included: Your purchase includes 1 X DC18RC Makita Battery Charger to keep your tools ready for action.

Genuine Makita Product

DC18RD Fast Charging Battery Charger by Makita – the practical solution for powering your Li-Ion batteries.

Fast Charging: Charges two of our 6.0Ah Makita batteries in just 55 minutes 

Built in USB Port: Built-in USB port for charging portable electronic devices

Built-In CPU: The charger's CPU optimizes charging by reading the battery's memory chip, prolonging battery life.

Efficient Cooling: The forced air cooling fan minimizes charging time by maintaining the ideal battery temperature.

Digital Power Display: Monitor battery and charging status with the digital display for informed usage.

240 Volt Model: This charger is a 240-volt model with C-Tick compliance for versatility. Draws 460W

Genuine Makita Product

Crafted from premium 304 grade stainless steel, our queen isolation cage sets the new standard for durability and corrosion resistance in beekeeping equipment. 

Fits one full depth frame with either 33mm or 35mm end bars.

Applications:

1. Queen Breeding: Perfect for queen breeders to ensure optimal larvae age for grafting, facilitating superior queen production.
2. Winter use in warmer climates: Ideal for limiting brood production during winter months, effectively reducing varroa mite reproduction. Reduces the colonies food requirements due to less brood.
3. Swarm control in Spring: The speed of colony growth can be controlled with the use of the cage at specific times to enable the colony to reach peak hive numbers at the start of the honey flow without swarming first.
4. Varroa Control: See the procedure below:-

A. Introduce a clean empty brood frame to the cage.
B. Find the queen and enclose in the cage.
C. Position the cage into the middle of the brood nest.
D. A good queen will lay in virtually every cell within 2 days.
E. After 26-28 days, there will be virtually no capped brood and all mites will be exposed to treatment. Can be 23 – 25 days if there is no drone brood.
F. Vaporize with Oxalic Acid for virtually complete mite elimination.
G. Whenever desired, the frame of brood with queen can be removed from cage and added back to brood nest.
H. The cage can be removed from the hive or left at the side of the brood box with a food frame enclosed until needed.

Specifications.

• 40mm inside width, 48mm outside width.
• 459mm long x 242mm high.
• The top cap is 484mm long.
• The air gap in the mesh is 4.3mm. Bees can take pollen through successfully.
• Has a clip-on cap which is held firmly down when the next box or hive mat is added above it.

Internal hive dimensions must be the Langstroth standard to ensure the cage fits properly and there are no gaps for the queen to escape.

Many beekeepers ensure their queens are marked so they are easy to find for caging when required. The labour cost for this procedure is negligible when compared to the cost of resurrecting colonies killed by varroa mites!

Three-frame cage available here.

As we see more and more varroa resistance to the synthetic miticide strips, beekeepers are turning to organic acids for successful varroa control. There is no evidence worldwide of the mites getting resistant to them. The stainless steel cages are very resilient in an acid environment and will not oxidise and deteriorate like galvanised steel products.

It pays to get quality!

Crafted from premium 304 grade stainless steel, our queen isolation cage sets the new standard for durability and corrosion resistance in beekeeping equipment. 

Fits three full depth frames with either 33mm or 35mm end bars.

Applications:

1. Queen Breeding: Perfect for queen breeders to ensure optimal larvae age for grafting, facilitating superior queen production.
2. Varroa Control in Warmer Climates: Ideal for limiting brood production during winter months, effectively reducing varroa mite reproduction.
3. Increased Honey Production and Queen Management: The three-frame cage revolutionizes honey production. See the procedure below.

Benefits of using the 3-frame cage during the Honey Flow:

A. Eliminates the need for a queen excluder, resulting in increased honey yield.
B. Optimizes hive resources with less brood and more nurse bees available for honey gathering or ripening.
C. Significantly reduces mite reproduction with the decreased brood area.
D. Three good brood frames are enough to sustain the hive during a honey flow period of 8 to 10 weeks.
E. At the end of the honey flow, the 3 brood frames can be removed to make a nucleus colony with the old queen.
F. A queen cell or mated queen can be introduced to the production hive for requeening purposes.
G. The production hive can be vaporized with Oxalic Acid to kill virtually every varroa mite in the hive while there is no capped brood. Super cheap & efficient with InstantVap.
H. Start the Autumn (Fall) with zero varroa mites!
I. Alternatively, the 3 brood frames can be frozen to kill the varroa mites inside the cells then added to strong healthy colonies to clean up and re-use.

Specifications.

• 109mm inside width, 121mm outside width.
• 459mm long x 242mm high.
• The top cap is 484mm long.
• The air gap in the mesh is 4.3mm. Bees can take pollen through successfully.
• Has a clip-on cap which is held firmly down when the next box or hive mat is added above it.

Internal hive dimensions must be the Langstroth standard to ensure the cage fits properly and there are no gaps for the queen to escape.

Many beekeepers ensure their queens are marked so they are easy to find for caging when required. 

 One frame cage available here.

As we see more and more varroa resistance to the synthetic miticide strips, beekeepers are turning to organic acids for successful varroa control. There is no evidence worldwide of the mites getting resistant to them. The stainless steel cages are very resilient in an acid environment and will not oxidise and deteriorate like galvanised steel products.

It pays to get quality!