New Arrival Beekeeping Products

Keep Your Nassenheider Evaporator Working at Its Best

Over time, the wick and blue cloth in your Nassenheider evaporator will wear out and need replacing for optimal performance.

Beequip stocks genuine replacement parts to keep your Varroa treatments effective and consistent.

Order your replacement wick and cloth set here and keep your Nassenheider running smoothly.

Single Pettis Test Jar – Boost Your Varroa Monitoring Efficiency

Expand the capacity of your Pettis Test Kit with this additional test jar. Whether you're managing multiple hives or working in a team, having extra jars on hand allows you to run simultaneous tests—saving time and increasing accuracy across more colonies.

Crafted for durability and ease of cleaning, this sturdy jar is ideal for serious beekeepers focused on efficient, large-scale Varroa monitoring.

Features:

• Compatible with the Beequip Pettis Test Kit

• The mesh cap is made from stainless steel to ensure a very long life.

• The design ensures that there are no leges that mites can get stuck on, to give false results.

• Enables multiple tests at once

• Durable, reusable, and easy to clean

• Essential for high-volume hive checks

A smart addition to your mite monitoring toolkit.

Find out more about Pettis Testing here

View or Download our Pettis test kits instructions here

PETTIS TEST KITS: Find out what miticides are not working for varroa mite control and stop wasting money on ineffective treatments!

Use data, not guesswork.

The Pettis Test Kit is a practical and cost-effective solution for beekeepers to detect varroa mite resistance to synthetic miticide strips before it is too late and there are extensive hive losses.

Designed to provide reliable results, the Pettis Test Kit will identify what percentage of varroa mites are resistant to the synthetic miticide that is being tested.

Save a lot of money by only investing in mite control treatments that are still effective.

Key Features:

• Robust and long lasting. The mesh cap is made from stainless steel to ensure a very long life.

• Effective design: The jar & mesh design eliminates any ledges that could hold falling mites and give a false reading.
  

• Reusable Design: Durable and easy to clean, ensuring repeated use season after season.

• What's included:
  3 x Pettis Test Jars and Lids
  1 x Bee Scoop
  1 x Wash Jar
  100ml of Mite Wash Detergent
  Record sheets
• Number stickers to label jars and caps.
• Instruction sheet.

Order extra Pettis Test Jars here

View or Download our Pettis test kits instructions here

How to use it:

Mite Wash Detergent – Fast & Effective Mite Control

Looking for the easiest and most effective way to get accurate mite counts in your hives? Our Mite Wash Detergent is based on the same formula as the detergent that is  recommended by Randy Oliver of ScientificBeekeeping.com  It has to be a "high sud" formula. Low sud detergents do not work effectively. Randy prefers the high sud detergent to alcohol. It kills the bees & mites quickly and humanely, and dislodge mites fast so you get a reliable reading with minimal fuss. It also stays clear for a longer period of time so that you can re-use the solution many times.

We've tested numerous options over the years, and nothing compares to the performance of this product. It’s fast-acting, inexpensive, and hassle-free.

How to Use:
The detergent is high concentration and should be diluted 1:100 with water.

Mix 10ml of detergent per litre of water for optimal results. The 100ml bottle has a flip cap for precise easy use.

The economical 1 Litre bottle option can be used for refilling the 100ml bottles or making up a bulk batch of wash solution.

Key Features:

• Extremely low cost per wash. Approx. 2 cents per wash if the same solution is used 8 times.

• Quickly & humanely kills bees for accurate mite washing.

• Dislodges mites fast for precise counts.

• Easy to use and cost-effective.

• The most reliable option we've tested.
• Available in 100ml and 1 litre bottle options. Click on the tab above.
• Dilute 1:100 with water when making up the mite wash solution.

If you are serious about effective Varroa Mite monitoring, this is the wash detergent that you must have in your toolkit.

Caution! Never shake a mite wash jar. Accurate results are only achieved if the wash jar is swirled to send the mites to outside of the jar and to drop through the bottom holes.

Tip: This product is fantastic for bubble blowing competitions!

Designed by Randy Oliver of ScientificBeekeeping.com

Stay on top of Varroa mite infestations with this ergonomic, easy-to-use Varroa sampling cup. This simple yet effective tool helps beekeepers monitor mite levels in their colonies and make informed treatment decisions.

Features:

• Ergonomic Design: Compact and comfortable for easy handling during inspections.

• Complete Kit: Includes one fluid-holding cup, one bee sample cup, and one lid.

• Simple Process: Fill with  Beequip Mite Wash detergent (10 ml per 1 litre of water) or 90% alcohol.

How to Use - WATCH VIDEO HERE:

1. 1. Place the perforated cup inside the solid cup.
   2. Add water to the cups up to the fill line. (Approx 70mm from the bottom) Will be approx. 250ml.
   3. Add 2.5ml (half a teaspoon) of the  Beequip Mite Wash detergent and stir until mixed thoroughly.
   4. Alternatively use solution already mixed in bulk or alcohol with 90% strength.
   5. Take a frame of brood and bees from a beehive and carefully check that the queen is not on it.
   6. Shake all the bees off the frame into a container like a beehive lid (upside down). Carefully check again that there is no queen.
   7. Bump the lid so any field bees take flight and go back to the hive. There will be mostly nurse bees remaining.
   8. Shake the bees into a corner of the lid and collect a level 1/2 cup of bees (125ml) and dump it into the mite wash cup.
   9. Immediately put the lid on the cup. Gently tap cup up and down to ensure all the bees are submerged.
   10. Let the bee sample sit for 1 minute to allow for the mites to release from the bees.
   11. Then gently swirl the cups for at least 30 seconds to allow the mites to precipitate through the bees.  Swirl to resonate with the wave, just enough so that the bees at the bottom are gently tumbling.
   12. Remove the lid and lift the perforated cup out and dump the bees.
   13. Count the mites that have settled on the bottom of the solid cup. A 150mm 10x magnifying mirror placed 100mm below the cup will make it easy. (NB. Don't leave the mirror in direct sunlight. It can start a fire!)

Caution! Never shake a mite wash jar. Accurate results are only achieved if the wash jar is swirled to send the mites to outside of the jar and to drop through the bottom holes.

📦 In stock now.

Puracell Foundation

Premium USA-made plastic foundation designed for better comb production and bee health. 

🔬 Why Beekeepers Choose Puracell

True-to-Nature Cell Design
Puracell is engineered with the same dimensions as natural honeycomb. The 36% thinner cell walls mean:

• Faster comb drawing
• More space for brood and food

Over 10 million sheets sold in the USA from 2020–2025 with zero durability concerns.

📽️ Product Overview

• Watch the Product Video

🌟 Key Features

• Thin top and bottom edges to suit 3mm frame grooves
• Available in black or white
• Domed cell bases – just like the bees make
• Waxed options available - 30g for 3/4 Depth - 40g for Full Depth 

More Cells, More Productivity

Puracell’s thinner walls give each frame up to 10% more cells, improving hive efficiency.

More space = More brood & honey storage = Less swarming.

🛡️ Ultra Resilience

Made from BPA-free virgin plastic, Puracell stands up to commercial extractors and the roughest handling without warping or bowing.

🎥 Instructional & Educational Videos

• Origin Story – Premier Bee Products
• Why Puracell Has 10% More Cells (Stop-Motion)
• Cell Sizes Explained
• Plastic Foundation in Beehives? – Kamon Reynolds
• Applying Beeswax to Plastic Foundation – Kamon Reynolds

🎤 What Beekeepers Are Saying

Dusty Backer – 13,000 hives (Texas & North Dakota)
“The bees draw it out faster and better than anything I’ve used. No issues with durability. If the bees are happy, I’m happy.”

Mike & Jake Rudebush – 20,000 hives (Texas)
“Puracell beats Acorn and Pierco. No warping, even in extreme heat. It just works.”

Kamon Reynolds – North American Honey Bee Expo
“Yes to every question: fast drawing, thick wax coating, more cells – Puracell is now my go-to.”

Nate Cowen – Cowen Manufacturing
“Pura Frame and Puracell foundation is the best combination in the market. No jamming or blowouts. Premier makes world-class products.”

📺 More Testimonials

• Kamon Reynolds & Greg Burns – Puracell Overview (12:15–16:45)
• Kamon Reynolds Review (19:30–20:45)
• Kenny Lappe Nuc Observations

Meet the ultimate hive tool—30cm long, 4mm thick, and crafted from high-quality spring steel for maximum leverage.

Designed to flex, not bend, for effortless hive work.

Made in Portugal.

View Strength test video

65% Formic Acid – Ready for Nassenheider Evaporators

Important: Formic Acid can't be shipped to rural addresses. See shipping details at the bottom of this page or contact us to discuss your options. Shipping may take a few extra days.

Temporary Shipping Delay: We are currently experiencing delays of 2 to 3 weeks for delivery. We appreciate your patience while we resolve this.

For Use with Nassenheider Evaporators

This 65% Formic Acid solution is prepared for use with the Nassenheider Professional Evaporator, enabling slow and consistent evaporation over approximately 20 days. Designed for easy handling and consistent performance in temperature-controlled applications.

Key Features:

• Pre-Mixed 65% Solution – No dilution or mixing required
• Steady Release Profile – Suited to devices such as the Nassenheider Evaporator
• Available in Two Sizes – Choose between 1.15kg bottles or 23kg drums
• Compatible with Common Application Devices – Used in both professional and hobbyist settings

Available Sizes:

• 1.15kg Bottle – Ideal for small-scale applications
• 23kg Drum – Suitable for bulk or repeated use

Application:

Add the required amount to your Nassenheider Evaporator following the manufacturer’s instructions. Evaporation may occur over a period of approximately 20 days depending on environmental conditions. Always follow all safety and handling guidelines.

Safety Guidelines:

• Wear protective gloves and safety goggles when handling
• Use in a well-ventilated area away from heat and sunlight
• Keep out of reach of children and animals
• Store upright in a cool, dry location

Shipping Information

Formic Acid is classified as a Dangerous Good (DG), and special transport conditions apply:

1.15kg Bottles:

• Ships via courier to urban addresses only (no rural delivery)
• Up to 6 bottles can ship in one parcel for the same DG charge

23kg Drums:

• Must be shipped via truck to urban business addresses only
• Freight costs are better value for 4+ drums per shipment

Freight Estimation:

After adding items to your cart, proceed to checkout to view the estimated shipping cost. If the rate looks high, return to your cart and submit a quote request for a more accurate freight price.

Need help? Contact us for assistance with bulk shipping or delivery options.

⚠ Disclaimer

This product is not advertised or sold for any agricultural compound use as defined under the ACVM Act 1997, including but not limited to the treatment or control of Varroa mites. If you require a registered product for such use, please consult an appropriate registered compound or seek professional advice.

Click here for our Blog article on how to test for Varroa mites in your beehive.Nassenheider Professional Evaporator - Advanced Varroa Control

Please order in multiples of 2 units. That is is how they are packaged at the factory, with 46 evaporators packed per carton. Please note: the evaporator is sold without 65% Formic Acid. Click here for Formic Acid.

Take control of varroa mites effortlessly with the Nassenheider Professional Evaporator. This long-term evaporation system is designed for safe and effective varroa treatment in beehives. Perfect for autumn (and Spring) varroa control, it utilizes a 65% formic acid (FA) solution for consistent evaporation over a 20 day period when using the No.2 wick. Beehives with high infestations can be brought under control in a relatively short space of time. In areas with high re-infestation issues, it is recommended to do 2 treatments. For treatments in summer or during a honey flow, we recommend using Oxalic Acid Extended-release (OAE) strips.

Key Benefits:

• Cost-Effective Varroa Control – A reliable, long-term solution that reduces expenses.
• Healthier Bees – Clients report reduced symptoms of chalkbrood and nosema after a 20-day FA treatment.
• Boosted Honey Yields – Stronger colonies mean better honey production.
• No resistance – Nowhere in the world have varroa mites grown resistance to these natural products - Formic Acid, Oxalic Acid or Thymol.
• Proven over many years – Europe have been treating mites with natural products for over 40 years.
• No residues – Formic Acid and Oxalic Acid leave zero residues in the comb.
• Less Sugar Feeding – Healthier bees naturally gather more food during the off-season.
• Simplified Safety – Easy-to-follow procedures minimize risks when handling formic acid. 65% FA is safer to handle than common off-the-shelf 84% FA.

Product Features:

• Complete Kit: Includes the evaporator, 250ml bottle, and three wick sizes for adjustable evaporation rates.
• No. 1 Wick: Very slow evaporation and suggested for use in Nucleus colonies.
• No. 2 Wick: Ideal for single brood box colonies, evaporating 250ml of FA in approximately 18 days. If filling the bottle to the top = 290ml and will last approx 20 days. 14ml/day.
• No. 3 Wick: Recommended for double brood box colonies. One of our tests in Jan 2025 showed 250ml evaporation in 7 days. 36ml/day.
• Versatile Design: The evaporator requires a 75mm spacer rim located directly above the brood box. 90mm top feeder rims or empty Supers can also be used. 

Extra 250ml Nassenheider bottle? Click Here.

Need a rim? Click Here. 
Want mesh on the bottom of the rim? Shop Here

Evaporation rates:

With 65% Formic Acid, it is recommended to evaporate between 9 and 22 mill per day per full depth brood box. 22 mill per day in one brood box is at a level where it is thought to disrupt the mites under the cell cap. But that high level of exposure is not necessary for good mite control. 14 mill per day will kill virtually all the phoretic mites. (Mites on bees) Drone cells are capped for 14 days so as long as there is an application killing virtually all phoretic mites for a continuous 15 day period then good varroa control can be accomplished.

Safety.

Formic Acid liquid, and the gas from the liquid, can damage skin and eye tissue. It is very important that suitable protective clothing is worn. It is especially important when filling bottles from the bulk supply containers. A respirator mask with face protection, nitrile gloves, PVC apron and overalls should all be worn. Replacing empty bottles with full bottles in the field requires nitrile gloves as a minimum. Stand upwind when doing this procedure.

Field-Tested Results:

In a Featherston field trial, where autumn varroa control was historically challenging, the Nassenheider Evaporator delivered outstanding results, significantly reducing mite levels and improving colony health. Read the full blog HERE.

Usage Tips:

• Assemble evaporator parts with desired wick size.
• Spread the fleece cloth in the tray and secure it with the clips provided. Double up the cloth at one end so the post for the bottle clamp is not covered.
• Fit the bottle holder onto the post.
• In an outdoor location and with suitable protective clothing, fill the bottle with 250mls of FA and secure the lid for safe transportation.
• At the apiary site, place the tray on top of the brood nest.
• Remove lid from bottle and screw on the evaporator while the bottle is vertical.
• Check the screw connection for tightness to ensure safe operation.
• Place bottle with evaporator into the bottle holder. See video for more info.
• Fit a 75mm rim to surround the evaporator. Fit hive mat and lid. 
• For creative beekeepers: Cut old full-depth boxes into three rims and paraffin-dip them for sterilization.
• Top Tip:- Extra bottles can be purchased separately here. Fill hundreds of bottles in a safe manner & location then fit them to the evaporators out in the field as required. The beekeeper is then exposed to very little FA and only needs to wear protective gloves. Very similar to handling Formic Pro pads.
• NB. If your beehive has a vented base, it is recommended to block the vents and leave the front entrance fully open for best results.

For more info and FAQ: Click here.

For our Blog article on how to test for Varroa mites in your beehive: Click here.

Why Choose Nassenheider?

Engineered for performance and safety, the Nassenheider Professional Evaporator is trusted by beekeepers to protect their hives effectively. With 46 units per carton, stock up for your apiary or share with fellow beekeepers. Order in multiples of 46 for the best value!

Use with 65% Formic Acid: Available here.

This large 304 grade stainless steel heated tank makes it nice and easy to liquify crystallized honey, or wax or anything that requires gentle heat!

The tank has an outer jacket which is filled with water or oil. The electric element heats the liquid in the outer jacket directly to provide a very safe and even heat to the contents inside the tank.

There are two size options to choose from: 
- 80 Litre
- 100 Litre

The tank can be heated close to 90 degrees. The tank has an outlet at the bottom. A ball valve comes as standard. You can also fit a honey gate, sold separately here.

The unit has an accurate and easy-to-use thermostatic controller. Adjustable from 30°C to 90°C where you set upper and lower limits. Simply set your upper and lower limit and the element will maintain the temperature between that setting. Once the jacket has heated to the desired temperature, the thermostat only supplies power to the heating element as it is needed to maintain the correct temperature.

Dimensions:- Both tanks are 510mm diameter plus any of the fittings on the side.  Height to the top of the tank:
80 Litre - 630mm.
100 Litre - 700mm

230 volt, 2000 watt.

Stay prepared with the Swedish Cloth Standard Kit, ideal for large-scale beekeepers or those looking for long-term hive maintenance solutions. This bulk kit includes everything you need to make thousands of Swedish cloths, ensuring your hives remain healthy and productive.

Remember to mix your solution 50/50 for these strips

Click here for more info on the Swedish Cloths

Click here to view our instruction guide.

What’s Included in the Standard Kit?

• 4000 Swedish Cloths: Ready for soaking and use in your hives.
• 50kg Oxalic Acid (OA): High-purity oxalic acid for effective treatments.
• 50kg Glycerine: Premium glycerine for optimal absorption.

Why Choose the Standard Kit?

• Bulk Supply: Perfect for commercial or large-scale beekeeping operations.
• Cost-Effective Solution: Buy in bulk and save.
• Reliable Hive Maintenance: Ensure continuous care for your hives.

This comprehensive kit is designed for serious beekeepers who want a ready supply of Swedish cloths to support their hive management needs.

NOTE: this may exceed our websites shipping capability. Please request a quote and we will get back to you as soon as we can.

Get started with ease and precision! This DIY Swedish Cloth Kit includes everything you need to make your own Swedish cloths for use in your beehives. Perfect for hobbyist beekeepers, this kit comes with all the components and tools to simplify the process and ensure success.

Whether you're maintaining healthy hives or exploring innovative methods for pest control, this kit offers convenience and value, just like our popular Hobbyist Kit for Oxalic Acid (OA) treatments.

Click here for more info on the Swedish Cloths

Click here to view our instruction guide.

What’s Included in the Kit?

• Small Soak Tub: Perfect for preparing your Swedish cloths.
• 4-Litre Pail with Lid: For mixing and storage.
• 1.25kg Glycerine: High-quality glycerine for optimal absorption.
• 1.25kg Oxalic Acid (OA): Pure oxalic acid for effective results.
• 100 x Swedish Cloths: Ready to soak and use.
• 4 Ziplock Bags: Ideal for storing your prepared cloths.
• Digital Thermometer: Ensures precise temperature control during preparation.
• Wooden Trivet & Stirrer: Keep everything steady and well-mixed.
• Instruction Booklet: Easy-to-follow, step-by-step guide to ensure success.

Why Choose This Kit?

• All-in-One Solution: Save time gathering components; everything you need is included.
• Hobbyist-Friendly: Designed for small-scale beekeepers looking for cost-effective and reliable hive management solutions.
• Simple Instructions: Clear guidance to help you create Swedish cloths like a pro.

Click here to view the full instructions online and start your journey toward better beehive care today!

Easily restock your Swedish cloth supplies with this convenient Swedish Cloth Refill Kit. Designed for beekeepers who already have the tools, this refill pack includes the key components you need to keep your hives in top shape.

Remember to mix your solution 50/50 for these strips

Click here for more info on the Swedish Cloths

Click here to view our instruction guide.

What’s Included in the Refill Kit?

• 100 Swedish Cloths: Ready for soaking and use in your hives.
• 1.25kg Oxalic Acid (OA): Pure and effective.
• 1.25kg Glycerine: High-quality glycerine for optimal absorption.
• 4 Zip-lock Bags: For easy storage of the soaked strips
  

Why Choose This Refill Kit?

• Quick & Easy Restocking: Ideal for hobbyist beekeepers with an existing setup.
• Cost-Effective: Only the essentials—no extra tools or packaging.
• Hive Maintenance Made Simple: Keep your treatments going without interruption.

Keep your beehive care routine smooth and efficient with this refill kit. Pair it with your existing setup for continuous results!

Swedish Cloth is used extensively by beekeepers in USA to keep their beehives healthy.

It is an excellent matrix for absorbing Oxalic Acid / Glycerine solution.

The Beequip Swedish Cloth is a high-quality product made in Germany, consisting of 70% cellulose, 30% cotton, and is 100% biodegradable.

Click Here to see our Biodegradable Report.

Click Here to see our Material Test Report.

The BQ Swedish Cloth does not contain colouring additives or flame retardant chemicals found in other products.

BioGro has approved it for Organic Beekeepers.

The cloth is pre-cut into strips suitable for beehives. Each dry cloth strip measures 195mm x 43mm x 2mm and weighs approximately 2.4 grams.

A dry strip will soak up 25 grams of OA / Glycerine solution, swelling to approximately 195mm x 47mm x 4mm.

Click here to purchase a full setup kit for hobbyists.

Hobbyist Refill and Standard Refill kits are available.

Important: Research from clients in the USA states that four strips are more effective than using a single pad with the same surface area. Having 260% more edge line significantly improves efficacy.

Packed 4000 per carton, 80,000 per pallet.

Directions:

Prepare a solution comprising 50% Oxalic Acid Dihydrate and 50% food-grade glycerine by weight. See detailed instructions and videos in the mixing guide. Beequip Cardboard strips are soaked in a solution of 40% Oxalic Acid, whereas Swedish Cloth strips use a 50% solution. Note that a 50% OA/Glycerine solution takes slightly longer to dissolve and mix properly.

While the solution is around 54–58°C, soak each strip with approximately 25 grams of solution. Place the strips on their edges in a flat-bottomed soak bin, ideally in a warm place (20–30°C). Strips absorb the solution fully within 60 minutes. Allow the bin to stay in a warm place for 24 hours to equalise the solution distribution. When cooled to room temperature, the solution will solidify within each strip.

The strips can then be used immediately or packed into airtight ziplock bags for long-term storage.

A typical strong colony with two brood boxes should have four strips placed horizontally between the brood boxes, leaving spaces between the strips.

Scrape off burr comb first.

The four strips work more effectively than using a single larger pad.

Click here to view our full instruction guide.

Caution:

Reports from the USA indicate that this system is extremely effective when placed horizontally between the brood boxes in double brood box hives. However, it is less successful over single brood box colonies.

Randy Oliver (scientificbeekeeping.com) agrees with this observation, advising that OAE strips be fitted vertically over the frames when used in single brood box colonies, similar to our cardboard strips. See Beequip Cardboard Strips for reference.

Fun fact: Bees maintain an environment in the brood nest that is ideal for the cloth’s effectiveness, maintaining a temperature near 34°C and humidity between 58%–70%. This controlled environment is absent above a single brood box colony.

Strip Life: The lifespan of strips depends on bee activity such as propolis coating and chewing. Replace strips every 8–12 weeks, or every 10 weeks in cases of significant mite re-invasion, particularly during Autumn.

ENSURE YOU SELECT THE CORRECT BATTERY TYPE BEFORE ADDING TO CART.

The InstantVap LITE 18V is a revolutionary, lightweight, and compact cordless oxalic acid vaporizer, perfect for small-scale beekeepers looking to simplify Varroa mite treatments. Designed with efficiency, durability, and practicality in mind, the InstantVap LITE offers all the performance you need for up to 20 colonies. It is full commercial quality like the Compact model but has an economy heating system to conserve battery power and hence the reason for slightly longer cycle times.

or click here to watch the Short Video.

Video here of original InstantVap model showing application procedures. (Applies to all InstantVap models).

Key Features

Battery Compatibility

The vaporizer is dispatched with a battery connector plate to suit one type of battery only. Choose from a range of popular battery options below:-

• Makita LXT 18V
• Milwaukee M18
• Bosch Blue ProCore 18V
• Bosch Green Power4All 18V
• Dewalt XR 18/20V FlexVolt 20/60V or 18/54V (Note: Power Stack batteries are incompatible)
• AEG 18V 
• Hikoki / Hitachi 18V
• Black+Decker 18V
• Ozito 18V
• Metabo 18V

Note: Batteries are not included.

Smart LED Feedback

Stay in control with a simple, intelligent LED system:

• Slow blink: Warm-up
• Steady-on: Ready for dosing
• Fast blink: Vaporizing in progress
• Double blink & pause: Battery discharged

Innovative Design

• Acid-Resistant Materials: Built with stainless steel, aluminium and brass for durability and easy maintenance.
• Dynamic Temperature Control: Prevents overheating and eliminates waiting for cooldowns.
• Adjustable Dispenser: A tool-free, roll-on design with a 1-4 gram scale for precise dosing.
• Optimized Brass Spout: A straight, 6mm diameter design ensures no pipe bends, reducing clogs. Easy to clean and replace.
• Stable Operation: Fits snugly into a 6.5mm hive hole, supporting its weight without tilting.

Durable, Safe, and Reliable

Designed for cold, windy conditions, the InstantVap LITE features a double-wall furnace for consistent performance. Its deep discharge protection shuts the device down at 15.4V to prevent battery damage.

With CE certification and a robust build of acid-resistant stainless steel and brass, the InstantVap LITE ensures user safety and long-lasting reliability. The compact, lightweight design makes it ideal for hobbyists or small-scale beekeeping operations, offering unmatched convenience and practicality for Varroa treatments.

NB. Minimum of 100mm of free air space is recommended in front of the outlet nozzle to prevent the oxalic acid from solidifying on surfaces.

Why Choose InstantVap LITE?

• Lightweight and portable for easy field use.
• Low cost per treatment—just cents per hive!
• Compatible with most popular power tool batteries.
• Engineered to last, with minimal maintenance required.

Treat your colonies easily and efficiently – get your InstantVap LITE today! 

6 Amp/hr 18V Makita LXT Batteries also available here

Respirators must be worn when vaporizing - Check out our range here

We highly recommend giving our Blog article a read - Field Trial with InstantVap

Technical Specifications

• Power: 18V-20V; 145W; 8A
• Battery Requirements: 0.5Ah for heating, 1.5Ah for 10 treatments
• Treatment Time: 50-60 seconds per 2-gram dose
• Operating Temp: 230°C.
• Materials: Stainless steel frame, brass spout
• Weight: Lightweight and portable. 700g excluding battery.
• Spout Diameter: 6mm, requires a 6.5mm hive hole
• Operating Temperature Control: Pre-set, dynamic regulation
• Package Includes:
  • InstantVap LITE with selected battery socket
  • 1 Oxalic Acid Dispenser
  • 1 Cleaning Cap
  • 1 Spare O-ring
  • 2 Silicone Sleeves
• Warranty: 1 year with post-warranty repair available
• Certifications: CE certified
• Country of Manufacture: Designed and made in Hungary

This versatile beekeeping nuc box offers an efficient solution for hive warmth retention, transportation, and customization to meet specific hive management needs. With advanced edge-sealing technology, it keeps the hive insulated, creating a stable environment for bees.

Key Features:

• Enhanced Locking Mechanism: Features a secure, clip-on lid, providing an upgrade from traditional fastening methods and ensuring a firm hold for transport.
• Quick Assembly: Lightweight and simple to assemble in just 60 seconds.
• Durable Construction: UV-rated, waterproof, and stackable up to 80kg, crafted from strong, reusable material to enhance durability.
• Customizable Ventilation: Easily adjust the ventilation to optimize airflow as needed.
• Optional Bottom Queen Excluder: Enables direct hive splits into the nuc for convenient colony management.

With a high insulation rating and user-friendly assembly, this nuc box offers both reliability and ease of use for beekeepers.

Our own design - requested by many beekeepers!

Protect your hands while caring for your bees with our Short Gauntlet Bee Gloves. 

Made from durable cow hide with a reinforced wrist design, these gloves offer maximum protection with minimal wear and tear.

The thick elastic band keeps the bees out, and they are available in sizes XS to 3XL.

You can find the size chart here.

Made in Pakistan

Maintain peak performance with the Apisolis Replacement Coil. Durable, eco-friendly, and easy to install, it ensures smooth, reliable vaporization for your smoker.

Apisolis Replacement Coils are designed to efficiently heat the Native Solution, converting it into steam for your Apisolis Smoker. If your smoker isn’t producing enough steam, it may be time for a coil replacement.

To maintain optimal performance, check for liquid buildup beneath the coil and clean the connection pins to prevent interference. Before first use, soak the new coil in the Native Solution for at least 5 minutes to avoid burning the cotton inside. Ensure the sealing component is securely attached to the tank to prevent spills.

Find Apisolis Non Toxic Smoker here.

Keep your Apisolis smoker topped up with the 120 ml Native refill of the fragrance for the Apisolis Vaporizer.

Specially formulated for the Apisolis electronic vaporizer, this natural, compliant liquid is made from biological-origin ingredients and essential oils. It calms bees effectively without producing harmful smoke for you or your colony. With a gentle floral scent, it provides a soothing experience for both beekeepers and bees.

Apisolis Native fragrance composition: Propylene glycol of plant origin & ECOCERT certified. Active ingredients present in essential oils.

Discover Apisolis, the future of beekeeping innovation. Revolutionizing hive inspections, Apisolis provides a modern, healthier alternative to traditional smokers by harnessing the power of gentle and safe vapour.

Key Features:

Comfort: Apisolis excels in user-friendliness. Featuring automatic shut-off for efficiency, it simplifies hive inspections, making them smoother and more enjoyable.

Health: Designed with safety in mind, Apisolis eliminates flames, reducing burn risks and harmful smoke inhalation. Its gentle steam ensures a secure experience for both beekeepers and bees alike. Smoke from fires is carcinogenic and some beekeepers get asthma from the smoke inhalation. Use Apisolis to avoid these health hazards.

Safety: You can't start a fire with an Apisolis! Excellent tool when there is a fire ban. Many forestry companies ban smokers from their forests in summer. Here is the safe answer. Equipped with automatic temperature control and capable of producing uniform output, Apisolis generates vapors only as needed, minimizing accidents during use. 

Durability and reliability: Built to last and is fully repairable with spare parts readily available ensuring a long lifespan and sustained performance.

Low running costs: The tank on the Apisolis holds 15 mls of fragrance and will last for 460 long slow puffs! 

Integral rechargeable battery: Great for a days work. Recharge battery each night after use, or after each tankful of fragrance, whatever comes first. 

Top Quality. Made in France. 

Pack Contents:

This comprehensive pack includes everything needed to begin using Apisolis:

• 1 Apisolis Vaporizer: The core component, featuring innovative, user-friendly design.
• 1 Apisolis Native - 120ml: A specially formulated solution for generating soothing and safe vapor. Click Here  for more solution. The bottle will fill the tank on the Apisolis 8 times.
• 2x Coils: Ensuring extended and reliable use of the vaporizer. Click Here for replacement coils. One coil is required to create the vapour. The second one is a spare part to keep in storage. 
• 1 USB Charger Cord: Convenient for quick charging wherever you are.
• User Guide: With photos included.

Apisolis complements rather than replaces traditional smokers and is ideal for non-aggressive colonies and routine checks. It’s the preferred choice for beekeepers prioritizing health, bee welfare, and environmental impact. Start with Apisolis today for gentler, safer, and more sustainable beekeeping practices.

Excellent tool for AP2 apiary inspectors. Fit a plastic bag over the Apisolis, cut a hole for the nozzle. It can then be used without soiling it with potential AFB contamination. Simply change the bag for each apiary and the bellows don't have to be sterilized. Save heaps of time! 

Apisolis Native fragrance composition: Propylene glycol of plant origin & ECOCERT certified. Active ingredients present in essential oils.

The integral battery is 4400 mAh capacity. A 1 amp charger will take around 4 hours to charge it.

A few examples of accidental fires caused by beehive smokers:-

https://www.nzherald.co.nz/northern-advocate/news/mid-north-beekeeper-taken-to-hospital-after-fierce-scrub-fire/LAKLFMLOEHGYNVLGUWH54OANGA/

https://www.lejsl.com/faits-divers/2014/07/19/les-incendies-detruisent-plus-de-1000-ha-au-nord-de-madrid

https://www.larepubliquedespyrenees.fr/faits-divers/incendie/arbus-un-apiculteur-met-accidentellement-le-feu-a-des-herbes-seches-12076186.php?csnt=19255aae888

https://www.sbsun.com/2022/06/07/hesperia-brush-fire-caused-by-a-beekeepers-smoker-fire-officials-say/

Crafted from premium 304 grade stainless steel, our queen isolation cage sets the new standard for durability and corrosion resistance in beekeeping equipment. 

Fits three full depth frames with either 33mm or 35mm end bars.

Applications:

1. Queen Breeding: Perfect for queen breeders to ensure optimal larvae age for grafting, facilitating superior queen production.
2. Varroa Control in Warmer Climates: Ideal for limiting brood production during winter months, effectively reducing varroa mite reproduction.
3. Increased Honey Production and Queen Management: The three-frame cage revolutionizes honey production. See the procedure below.

Benefits of using the 3-frame cage during the Honey Flow:

A. Eliminates the need for a queen excluder, resulting in increased honey yield.
B. Optimizes hive resources with less brood and more nurse bees available for honey gathering or ripening.
C. Significantly reduces mite reproduction with the decreased brood area.
D. Three good brood frames are enough to sustain the hive during a honey flow period of 8 to 10 weeks.
E. At the end of the honey flow, the 3 brood frames can be removed to make a nucleus colony with the old queen.
F. A queen cell or mated queen can be introduced to the production hive for requeening purposes.
G. The production hive can be vaporized with Oxalic Acid to kill virtually every varroa mite in the hive while there is no capped brood. Super cheap & efficient with InstantVap.
H. Start the Autumn (Fall) with zero varroa mites!
I. Alternatively, the 3 brood frames can be frozen to kill the varroa mites inside the cells then added to strong healthy colonies to clean up and re-use.

Specifications.

• 109mm inside width, 121mm outside width.
• 459mm long x 242mm high.
• The top cap is 484mm long.
• The air gap in the mesh is 4.3mm. Bees can take pollen through successfully.
• Has a clip-on cap which is held firmly down when the next box or hive mat is added above it.

Internal hive dimensions must be the Langstroth standard to ensure the cage fits properly and there are no gaps for the queen to escape.

Many beekeepers ensure their queens are marked so they are easy to find for caging when required. 

 One frame cage available here.

As we see more and more varroa resistance to the synthetic miticide strips, beekeepers are turning to organic acids for successful varroa control. There is no evidence worldwide of the mites getting resistant to them. The stainless steel cages are very resilient in an acid environment and will not oxidise and deteriorate like galvanised steel products.

It pays to get quality!

Crafted from premium 304 grade stainless steel, our queen isolation cage sets the new standard for durability and corrosion resistance in beekeeping equipment. 

Fits one full depth frame with either 33mm or 35mm end bars.

Applications:

1. Queen Breeding: Perfect for queen breeders to ensure optimal larvae age for grafting, facilitating superior queen production.
2. Winter use in warmer climates: Ideal for limiting brood production during winter months, effectively reducing varroa mite reproduction. Reduces the colonies food requirements due to less brood.
3. Swarm control in Spring: The speed of colony growth can be controlled with the use of the cage at specific times to enable the colony to reach peak hive numbers at the start of the honey flow without swarming first.
4. Varroa Control: See the procedure below:-

A. Introduce a clean empty brood frame to the cage.
B. Find the queen and enclose in the cage.
C. Position the cage into the middle of the brood nest.
D. A good queen will lay in virtually every cell within 2 days.
E. After 26-28 days, there will be virtually no capped brood and all mites will be exposed to treatment. Can be 23 – 25 days if there is no drone brood.
F. Vaporize with Oxalic Acid for virtually complete mite elimination.
G. Whenever desired, the frame of brood with queen can be removed from cage and added back to brood nest.
H. The cage can be removed from the hive or left at the side of the brood box with a food frame enclosed until needed.

Specifications.

• 40mm inside width, 48mm outside width.
• 459mm long x 242mm high.
• The top cap is 484mm long.
• The air gap in the mesh is 4.3mm. Bees can take pollen through successfully.
• Has a clip-on cap which is held firmly down when the next box or hive mat is added above it.

Internal hive dimensions must be the Langstroth standard to ensure the cage fits properly and there are no gaps for the queen to escape.

Many beekeepers ensure their queens are marked so they are easy to find for caging when required. The labour cost for this procedure is negligible when compared to the cost of resurrecting colonies killed by varroa mites!

Three-frame cage available here.

As we see more and more varroa resistance to the synthetic miticide strips, beekeepers are turning to organic acids for successful varroa control. There is no evidence worldwide of the mites getting resistant to them. The stainless steel cages are very resilient in an acid environment and will not oxidise and deteriorate like galvanised steel products.

It pays to get quality!

Special Tool for Caging Queen bees without having to use your hands!

Simply pull the foam out, trap the queen in the pipette hole where the foam was.
Wait till she's walking up in it and put the foam back in place.
Take the smaller white cap out and direct the nozzle into a cage.
Then blow through the foam to send the queen into the cage. See video below:

The latest 2nd Gen Version of the all popular InstantVap has arrived: Meet the InstantVap COMPACT!

Similar to the previous generation, this makes vaporizing oxalic acid (OA) in beehives an absolute breeze, however it is better in many ways!

NEW Design:
With a radical overhaul this unit is a lot smaller, lighter and stronger than the previous unit. Focusing on the essentials, this unit is more practical in the field. The unit sits a lot better with most standard batteries. With only one switch, the unit is simply controlled by an LED light.

Video here of original InstantVap model showing application procedures. (Applies to all InstantVap models).

NEW LED light
This unit is preset to all the right parameters and all you need to do is watch the flashing LED. The light is easy to see even on sunny days. Engraved on the unit is the following guide so you know what your InstantVap is doing:

By simplifying and making all these changes this new generation is available at a more affordable price! 

It is very cheap per application! The Oxalic Acid only costs 1.5 cents per beehive for a 3 gram dose (based on buying a 25kg bag for $120.00 +GST in Feb 2023). Treat 1000 beehives for only $15.00 +GST for materials.

Check out our InstantVap Operational Guide for more info.

Applications & suggested dose rates. (Also view the video. See the link below.)

1. For beehives with solid bases, apply 2g of OA vapour at the bottom entry. Block the entry with a wet towel for 5 - 7 minutes to trap all the vapour in the beehive while treating other beehives. 

2. For beehives with vented bases, use a vent blocker sheet and carry out the same process as stated above. The vent blockers can be removed after 5 - 7 minutes.

3. For beehives with vented bases that are very difficult to block, we recommend that you do a 3 gram dose from the top of the hive. A small notch cut from the rim of the hive mat is excellent for winter ventilation and a great spot to apply the vapour. If the beehive has lots of honey supers, a notch cut from the rim of the queen excluder can give good access for the vaporizer. we sell stainless steel excluders with an entry door which is ideal. See the examples on the video.

4. Alternatively, the vapour can be applied through a hole in the front plate of the brood box for the fastest application. Drill a hole as high as possible in the top brood box but close to the side so the vapour penetrates the hive between the outer wall and outer frame. Drill  a 6.5mm hole if using the brass nozzle bare. Drill a 9.5mm hole if using the silicon sleeve on the nozzle. After application, the hole can be blocked up with a golf tee.

6 Amp/hr 18V Makita LXT Batteries also available here

Respirators must be worn when vaporizing - Check out our range here

Cleaning of these devices is important - Watch our Cleaning Video.

For a quick overview on how the device functions, watch our video.

Included with each Vaporizer:
1 x Vaporizer
1 x Plunger
1 x 500g of OA
2 x Silicone Caps
2 x Silicone Sleeves
2 x Spare O-Rings
2 x Cleaning Caps

The finer details:

• The device has built-in battery protection electronics.
• Power: 18V-20V; 250W; 14A
• Approx. 1Ah is required for heating up, then 1Ah provides enough power for 9 to 10 two gram doses of oxalic acid treatment. Each 2 gram dose takes approx. 18 seconds to vaporize.
• Stainless, acid-resistant steel frame and dispenser
• Pre-set operating temperature: 230℃ / 445F (not adjustable)
• Fast, tool-free, roll-on adjustment of the oxalic acid dispenser, with 1-4 gram scale, dispensing oxalic acid with one push. Replacements or extras are available here They fit perfectly in the handle as well as in the dispenser chamber.
  
• 6mm diameter strong brass outlet pipe, not prone to clogging due to the excellent design. Easy to access and clean in case of a blockage, the entire length of the tube is accessible. Some beekeepers drill a 7mm hole in the hive box and insert the nozzle into the hole.
• Stable in the hive hole, does not fall out or tilt sideways, can support its own weight (But do not lean on it!)
• There should be a minimum of 100mm free space in front of the nozzle otherwise some of the Oxalic Acid will crystalize on the surface and be wasted.
• Double-wall furnace, works well in cold, windy weather

The InstantVap is powered by common power tool batteries including:

• Makita LXT 18V
• Milwaukee M18
• Bosch Blue / ProCore 18V
• Dewalt XR18/20V & FelxVolt Batteries (Note: Power Stack batteries are incompatible)
• Metabo 18V
• Ozito PXC 18V
• AEG Pro 18V 
• HiKOKI / Hitachi 18V
  

The device is compatible with only one type of battery. Please select your type carefully. Price does not include any batteries. 

DC18RD Fast Charging Battery Charger by Makita – the practical solution for powering your Li-Ion batteries.

Fast Charging: Charges two of our 6.0Ah Makita batteries in just 55 minutes 

Built in USB Port: Built-in USB port for charging portable electronic devices

Built-In CPU: The charger's CPU optimizes charging by reading the battery's memory chip, prolonging battery life.

Efficient Cooling: The forced air cooling fan minimizes charging time by maintaining the ideal battery temperature.

Digital Power Display: Monitor battery and charging status with the digital display for informed usage.

240 Volt Model: This charger is a 240-volt model with C-Tick compliance for versatility. Draws 460W

Genuine Makita Product

The cutest little cartons to make our wooden sections even better!

Made from eco friendly cardboard, this is a perfect pair for the cellophane bags to give that complete finish.

Carton measures 110 x 110 x 50mm with a thickness of 0.5mm

One of the Best Quality Hive tools available.

Made in Europe from Tempered High Carbon steel.

This means that under very high load it will simply flex not bend or snap like the common hive tool.

Maxant or J-Tool Type - 270mm High