


Silicone Cover for InstantVap
760-0033
Price excludes GST
This silicone cover placed over the spout of the InstantVap can help to optimize the performance of the device. By covering the hot box at the top of the InstantVap, this cover aids in reducing heat loss, as well as containing any acid spills from the plunger.
Check out our InstantVap Operational Guide for more info
Dispenser nozzle
920-0912
Price excludes GST
This nozzle is the strongest and most practical one we could find for beekeeping.
These nozzles cope with the high workload of beekeeping work and will stand up to the pressure.
Has a hand-grip click lock system and a 25 mm swivel connector fitted. (With female thread)
Wash daily with warm water to maximise life.
Buy delivery hose to suit.
Cleaning Cap for InstantVap
760-0035
Price excludes GST
This silicone cap is used for cleaning the InstantVap
Steam Cleaning
After rinsing it out, start heating it up to 200 C. While its heating up get the cleaning cup as shown in the picture above. Fill it 3/4 full of water. Once the InstantVap gets to 200C, tip it upside down without the plunger in the spout. Slide the cleaning cap over the spout, then holding it firmly in place with 2-3 fingers, tip the machine up the right way with the nozzle point away from yourself or anyone else. The water in the cap will drop down into the chamber, instantly evaporate and steam out the nozzle. This will generate a bit of pressure on the cap so ensure your wearing gloves and holding it down tight!
Check out our InstantVap Operational Guide for more info
Silicone Cap for InstantVap x 2
760-0036.2
Price excludes GST
These slide over the nozzle & block any accidental vapor leakage e.g. during transport.
Alternatively, cut off the end and use as a heavy duty sleeve on polyhives
Check out our InstantVap Operational Guide for more info
Queen Excluder Cage for 3 frames. Stainless steel.
760-1030
Price excludes GST
Crafted from premium 304 grade stainless steel, our queen isolation cage sets the new standard for durability and corrosion resistance in beekeeping equipment.
Fits three full depth frames with either 33mm or 35mm end bars.
Applications:
Benefits of using the 3-frame cage during the Honey Flow:
A. Eliminates the need for a queen excluder, resulting in increased honey yield.
B. Optimizes hive resources with less brood and more nurse bees available for honey gathering or ripening.
C. Significantly reduces mite reproduction with the decreased brood area.
D. Three good brood frames are enough to sustain the hive during a honey flow period of 8 to 10 weeks.
E. At the end of the honey flow, the 3 brood frames can be removed to make a nucleus colony with the old queen.
F. A queen cell or mated queen can be introduced to the production hive for requeening purposes.
G. The production hive can be vaporized with Oxalic Acid to kill virtually every varroa mite in the hive while there is no capped brood. Super cheap & efficient with InstantVap.
H. Start the Autumn (Fall) with zero varroa mites!
I. Alternatively, the 3 brood frames can be frozen to kill the varroa mites inside the cells then added to strong healthy colonies to clean up and re-use.
Specifications.
Internal hive dimensions must be the Langstroth standard to ensure the cage fits properly and there are no gaps for the queen to escape.
Many beekeepers ensure their queens are marked so they are easy to find for caging when required.
One frame cage available here.
As we see more and more varroa resistance to the synthetic miticide strips, beekeepers are turning to organic acids for successful varroa control. There is no evidence worldwide of the mites getting resistant to them. The stainless steel cages are very resilient in an acid environment and will not oxidise and deteriorate like galvanised steel products.
It pays to get quality!
InstantVap Vaporizer 12 volt
760-0031
Price excludes GST
InstantVap 12V Oxalic Acid Vaporizer
A premium-quality vaporizer, expertly manufactured in Europe.
Launched at the end of 2021, the InstantVap has quickly become a favourite among beekeepers in America and Europe. Now, Beequip is proud to bring it to New Zealand as the country’s exclusive distributor!
This 12V model comes with a 4m lead and alligator clips for easy connection to any standard 12V battery—making Varroa treatment simple and efficient for all beekeepers.
Check out our InstantVap Operational Guide for more info
We also sell these in a version that is powered by common 18 volt power tool batteries. Click Here to view them on our website.
Respirators must be worn when vaporizing - Check out our range here
For a quick overview on the InstantVap, watch our video below:
Included with each Vaporizer:
1 x Vaporizer
1 x Plunger
1 x 500g of OA
2 x Silicone Caps
2 x Silicone Sleeves
2 x Spare O-Rings
2 x Cleaning Caps
The finer details:
Soak Tub 27L - Bare Unit
751-0007
Price excludes GST
Bare tub for sitting the soaker rack in and draining.
We recommend putting a drain grate in the tub to sit the crate on.
Metal Dispenser nozzle
920-0914
Price excludes GST
Similar to the other nozzle we sell yet in metal! This will last!
These nozzles cope with the high workload of beekeeping work and will stand up to the pressure.
Has a hand-grip click lock system and a 25 mm swivel connector fitted. (With female thread)
Wash daily with warm water to maximize life.
Buy delivery hose to suit.
Delivery Hose
920-0907
Price excludes GST
High quality hose that gives you extra reach from you tank.
This hose is one which copes with the rigorous beekeeping work and has been tested thoroughly by our own beekeepers
Great addition or replacement for your sugar tank.
Purchase a Dispenser nozzle here to suit.
Comes in three options:
15 metres of hose at 20 millimetres diameter
20 metres of hose at 20 millimetres diameter
15 metres of hose at 25 millimetres diameter
Please note: Lead times on these can be up to 2 weeks. Feel free to contact us directly if you wish to get an more exact time
Heavy Duty Hose Reels
920-0902
Price excludes GST
These high quality hose reels are an excellent way for getting your syrup from the tank to the beehive while keeping everything in a tidy orderly fashion. We know that these are put under great pressure when used by beekeeping staff therefore we didn't stop until we found ones of exceptional quality.
There are three options:
Auto Retract Hose Reel with 15 metres of 25mm delivery hose and a dispenser nozzle fitted. Has a 25mm inlet fitting. Can be mounted with bracket and dispensing guide at various angles.
Manual Hose Reel with 16 metres of 25mm delivery hose, dispenser nozzle, swivel and short connector hose fitted. Made in NZ from solid steel - built to last! The reels come fitted with a positive interlock mechanism to prevent the reel from unrolling when not in use.
Please note: These are usual stock items but during periods of high demand, lead times can be up to 5 weeks. Feel free to contact us directly if you wish to get an more exact time.
Heavy Duty Auto Hose Reel - 20m
920-0915
Price excludes GST
These high quality hose reels are an excellent way for getting your syrup from the tank to the beehive while keeping everything in a tidy orderly fashion. We know that these are put under great pressure when used by beekeeping staff therefore we didn't stop until we found ones of exceptional quality.
On each rotation, the reel has a click position where it can lock to prevent rewinding back. To release, pull hose out a small amount to release, then retract the hose on the reel.
Specifications:
Auto Retract Hose Reel with 20 metres of 20mm delivery hose and a dispenser nozzle fitted. Has a 25mm inlet fitting.
Due to the weight of sugar syrup, we recommend that the reel is mounted on a flat surface like as shown in the photo. Not mounted on a vertical surface.
Mega Oxalic Acid & Glycerine REFILL Package
751-0015
Price excludes GST
This package has been specially set up for beekeepers who have bought the Plus package in the past or who wish to save money and buy bulk.
This package includes the following: -
80000 x Beequip strips
1250kg x Glycerine
850kg x Oxalic acid
Effective Cost per strip is 19 cents +GST total.
Bags to store soaked strips are available here.
Unfortunately this package may exceed the website shipping capacity - in this case simply request a quote from the cart page after adding it to your cart.
Plus Oxalic Acid & Glycerine REFILL Package
751-0012
Price excludes GST
This package has been especially set up for beekeepers who have bought the Plus package in the past or who want to save money and buy bulk.
This package includes the following: -
16000 x Beequip strips
250kg x Glycerine
175kg x Oxalic acid
Effective Cost per strip is 20 cents +GST total.
Bags to store soaked strips are available here.
Unfortunately this package may exceed the website shipping capacity - in this case simply request a quote from the cart page after adding it to your cart.
Standard Oxalic Acid & Glycerine REFILL Package
751-0011
Price excludes GST
Got the Standard package but running low on supplies? This refill pack will keep you going. The standard refill pack isn't enough? Try our Plus Refill Package here.
Effective cost per strip is only 22 cents +GST total!
This package includes the following: -
5120 x Beequip strips
75kg x Glycerine
50kg x Oxalic acid
Bags to store soaked strips are available here.
Unfortunately this package may exceed the website shipping capacity - in this case simply request a quote from the cart page after adding it to your cart.
Plus Oxalic Acid & Glycerine Package
751-0002
Price excludes GST
Keen to set yourself up with everything to make oxalic acid and glycerine strips?
Our plus package includes all the tools and ingredients to make it work.
These packages are set up to suit with the applicator being the Beequip strip. You can learn more about these strips here.
Refill Pack to suit this bundle is also available.
This package includes the following: -
17888 x Beequip strips
250kg x Glycerine
175kg x Oxalic acid
4 x Soak tubs
2 x 27 litre Bare tub
1 x Mixing guide
Bags to store soaked strips are available here.
Unfortunately this package may exceed the website shipping capacity - in this case simply request a quote from the cart page after adding it to your cart.
Standard Oxalic Acid & Glycerine Package
751-0001
Price excludes GST
Keen to set yourself up with everything to make oxalic acid and glycerine strips?
Our standard package includes all the tools and ingredients to make it work.
These packages are set up to suit with the applicator being the Beequip strip. You can learn more about these strips here.
Refill Pack to suit this package available here
This package includes the following: -
5120 x Beequip strips
75kg x Glycerine
50kg x Oxalic acid
2 x Soak tub
1 x 27 litre Bare tub
1 x Mixing Guide
Bags to store soaked strips are available here.
Unfortunately this package may exceed the website shipping capacity - in this case simply request a quote from the cart page after adding it to your cart.
Large Transport Tank 1000L & 1500L
920-0400
Price excludes GST
Large transport tank for holding sugar syrup on trucks.
Options:
1000 litre tank with one outlet. Natural colour
1500L x 950W x 1060mm high. No baffles.
1500 litre tank with one outlet. Natural colour
1950L x 1100W x 1200mm high. No baffles.
Galvanized steel skid for forklift and security is available - please inquire direct.
1 - 2 week lead time
Honda Pump for Sugar Feeding
920-0051
Price excludes GST
Genuine 50mm Honda Petrol pump ready to hook straight up to your sugar tank or whatever you plan to pump.
Comes with a silicone carbide seal which is perfect for pumping sugar.
Produces a total of 4.8 horsepower - plenty of power for those cold mornings when the syrup is thick.
Features:
Options are:
- With a Heavy duty roll frame option.
- Without a Frame
Additional Tank - To Suit Honda Tank Package
920-0318
Price excludes GST
This is an additional 500 litre tank that can be connected to the back of any Honda Tank Packages, effectively giving you double capacity using minimal deck space on your truck. This of course comes with all the great following features:
Tank Dimensions: 1700mm wide, 1150mm high with lid, 400mm deep.
The filler cap has a breather valve and is bee proof.
Comes with palletized system ready to connect to another palletized Honda package.
The tanks stack together and can be interconnected.
The tank has three surge baffles and is very stable on uneven ground when ¾ full.
This includes a pair of larger steel straps (3mm thick) to secure both tanks to the base frame.
Mixer Jets are not fitted in the tank, as standard, but can be if desired. Most beekeepers use the primary tank for mixing then transfer the contents to the second tank without the mixer jets.
Allow 1 - 5 weeks lead time. Call us if you are urgent.
Beequip 500 Tank with Honda Pump
920-0312
Price excludes GST
These new 500 litre Slimline Tanks are a "must-have" for any beekeeper doing sugar syrup feeding. The features make it incredibly convenient and very useful without it getting in the way. These features include:
Special mixing jets are fitted inside the primary tank to allow you to mix your own syrup or mix feed additives.
Easy to add extra tanks to add another 500 litres capacity. By simply adjusting valves, you can have these tanks in parallel supply or with separate supplies to pump and hose.
3 Options available for the Beequip 500 Tank with Honda Pump are:
Allow 1 - 5 weeks lead time. Call us if you are urgent.
NOTE: After adding these to your cart, click request a quote rather than checkout, as we will need to quote freight separately. Thanks!
Beequip Slimline Tank 500
920-0100
Price excludes GST
These new 500 litre Slimline Tanks are a "must-have" for any beekeeper doing a sugar feeding. Its features make it incredibly convenient and very useful without getting in the way. These features include:
Tank Dimensions: 1700mm wide, 1150mm high with lid, 400mm deep.
The filler cap has a breather valve and is bee proof.
The tanks stack together and can be interconnected.
The tank has three surge baffles and is very stable on uneven ground when ¾ full.
3 Options Available for the bare tank are:
Bare tank with 4 threaded outlets
Bare tank with 4 threaded outlets and level indicator tube
Bare tank with 4 threaded outlets and level indicator tube and 25mm ball valve fitted for gravity feeding.
Allow 1 - 3 weeks lead time. Call us if you are urgent.