Daily Deals

This is a holder to put your frame in while inspecting it.

Also perfect for grafting or display purposes 

Drip Trays for a single stack of honey supers.

Perfect for keeping your honey supers in storage until they need to be extracted.
Closable vent for air circulation when the supers are in the hot room prior to honey extraction. 
Made to fit our Small Pallet Jiffy 
Stack tidily without getting jammed.

Holds up to 300kg +

Weight: 1.5kg

 522mm x 422mm x 148mm high

Convert a full depth Technoset brood box in the most efficient way to start nucleus hives.

In a hurry to split hives? Fit the kit to a single brood box and come back 3 days later to see which two nucs have no eggs. Scrape off any queen cells and insert a new caged queen in each. Alternatively, two queen cells can be added with queens almost ready to emerge.

During winter, the hives share the warmth generated within the brood box.

In the case of a lost queen, a divider can be removed and the two colonies united.

Check out the video:

Each feeder has a compartment with a lid for feeding pollen patties or protein supplements. The bees can only access the syrup in a narrow passage to prevent drowning. The feeders have vents to allow damp air to disperse through the vents in the Technoset roof. To refill the feeders, simply lift the roof and top up without any disturbance to the bees. Alternatively, three feeder valves can be fitted to the roof to avoid even lifting the roof when topping up the syrup.

The middle feeder includes the entrance for the middle Nuc and a sliding door.

This is an add-on kit for fitting to a Technoset beehive. Order beehives separately if required.

This kit contains:

• 3 Top inner feeders with dual compartments
• 2 Vertical divider
• 2 Independent entrance reducers with sliding door

Manufactured from high quality food grade polypropylene. Weight: 2.7 Kg

Please note:- Stock colours may be different to the photos shown.

Special Tool for Caging Queen bees without having to use your hands!

Simply pull the foam out, trap the queen in the pipette hole where the foam was.
Wait till she's walking up in it and put the foam back in place.
Take the smaller white cap out and direct the nozzle into a cage.
Then blow through the foam to send the queen into the cage. See video below:

For those that like 3/4 depth brood boxes or that would like to give them a go, this one is for you. The perfect 2 story 3/4 Technoset hive with everything you need.

Consists of:-

Technosetbee Anti-Varroa Vented Floor Technosetbee

Reversible Entry Guards

7 litre Top Feeder with "No drown" design.

Technosetbee Roof

2 x 3/4 depth Technosetbee Brood Box

20 x 3/4 depth WSP Russian Pine Frames with Medium Brood Wax Foundation fitted. 3 x Latch Kits

(No bees)

Please specify preferred box colours when ordering. (white, blue, green, yellow or purple)

Folding Bee Veil with Plastic Zip. White. For older Beequip beesuits and jackets

Makita BL1860 18V 6.0Ah LXT Lithium-Ion Battery

This battery is perfect for the Makita Version of the InstantVap.
6AH will give you a rough total of treating 40-50 Hives with a 2 gram dose. (Includes the heat up time)

Check out our Automotive Charger for these batteries here 
Single and Dual Wall chargers also available  

100% genuine Makita battery!

This is a pair of Cartridges to suit our Half and Full Face  Respiratory Masks
They are specifically for protecting you against Organic Acid Vapour or Acid Gas - Perfect for Vaporising Oxalic Acid or using with Formic Acid

The service life of any acid gas cartridge filter is affected by many factors.

Replace both the filters: -

• When the expiry date stamped on the sealed packet has elapsed.
• Once opened, maximum use time is 6 months (even if not used). The carbon will absorb contaminants from the general environment.
• When contaminant can be detected by smell or taste.

Meet standards and approvals AS/NZS 1716:2012

Stainless Steel Wax Press is the way to get the last of your honey from your cappings.
It works simply by screwing the contents of the basket,and therefore squeezing out any honey left in the cappings.

It also means you are left with much clear wax, which is great for melting down and mading into candles etc.

dimensions:
Internal cylinder is 23cm internal dia x 27cm high
Outside cylinder is 30 cm diax 32cm high.

The unit sit on a solid 19 cm high stand.

This can also be used for crushing fruit. The fruit will need to be chopped up rather small in so it can work properly.

High quality full depth Acorn foundation - Made in the USA

425mm x 213mm

Breakable bottom corners to make provision for the queen the the bees to easily access the other side of the frame.

Available as the bare plastic foundation or 100% Coated with approx 40 grams of beeswax

This package includes:
2 x Hive Tools
1 x Pair of Gumboots
1 x Technoset Bee Brush
1 x 3 layer Ventilated bee suit
1 x 230 volt Electric Uncapping Knife
1 x Double layer stainless steel honey sieve
1 x Manual 2 frame honey extractor
2 x pairs of long Ventilated leather bee gloves
1 x Practical Beekeeping in NZ Book
1 x Smoker 28cm (slightly different to what is shown in the photo)
1 x Beehive Package 16 which includes:
- Technoset roof
- 3 sets of latches
- 7 litre Technoset Top Feeder
- Technoset Vented Floor with reversible entry guards
- 20 Frames with Beeswax Foundation fitted
- 2 Plastic Insulated Technoset Full Depth Brood Boxes

Please comment in the Special Instructions box on the cart page as to what size gloves, gumboots and suit you would like. See sizing below:

Suit Sizing:

Glove Sizing: 

Gumboot Sizing:

Maximum Internal Length of Boot (mm):-
Size 3 - 245 
Size 4 - 255 
Size 5 - 265 
Size 6 - 275 
Size 7 - 285 
Size 8 - 290 
Size 9 - 300 
Size 10 - 310
Size 11 - 320 
Size 12 - 328
Size 13 - 338
Size 14 - 345 

Example:-

For feet that are 263mm long (maximum), size 6 suits best when worn with one pair of thin socks.

This complete beehive package includes the following:

- Technosetbee Anti-Varroa Vented Floor

- Reversible Entries

- 1 x Full Depth Brood Box. Colour will vary according to stock availability. See image with colour options!

- 10 x Full Depth Plastic Frames - Wax Coated

- Technosetbee 7Lt Feeder. 

- Vented Roof

- 2 x Latch Kits

(No bees)

Click here for Box Colours

 Please write your preferred box colour on the cart page

Congratulations on enrolling in the Land Based Training Apiculture course!

As you will be aware some equipment is provided in the course but not all of the essentials. We have made it easy for you and setup these special packages to provide you with the rest of the essential equipment you will need. The items included are based on feedback from Tutors and what we see best for you.

This package is for people running Full Depth hives and does not include Suit and Gloves. This is for students that have these already or would like to purchase a different style of suit and gloves. 

Included in the package:

2 x Assembled Full Depth Boxes
These are extra supers for your hive. The frames below will go in these and they will need to go on the hive as it grows. They are untreated and will need painting like the box in your course.

9 x Wooden frames with Medium Brood Wax Fitted
These are for the first wooden box above - they are for the second brood nest. You will build the first brood box in your course. We have done wood and wax as this is the most natural and best for the brood nest. There is only 9 as we are allowing for a frame feeder mentioned below

10 x Plastic Frames with Beeswax Coating
These frames are for the second box mentioned above. These are for honey collection super and will go above the queen excluder when your hive is ready to collect honey. We have done plastic frames as these are the strongest and cope with rigorous honey extraction. More honey supers maybe required as your hive continues to pull in honey.

1 x Full Depth Frame Feeder
This is an essential part of a hive as in winter the hive can use up all its stores and need to be fed Sugar Syrup to stay alive. As mentioned above, we have only done 9 frames for the second brood box so you can fit this in. It may need to be put in your first brood box if your hive is only 1 story high.

1 x SS Queen excluder with wooden rim
When your hive is ready to produce honey you will need to put on the honey super mentioned above. This excluder will go between the brood boxes and the hive to stock the queen going into the honey and laying eggs. you only want honey bees in there!

1 x Emlock Strapper
Keep this around your hive at all times when you are not going through it. it will keep everything secure and tidy.

1 x Pack of 4 Apivar Strips
this is a varroa treatment for your bees. It is normal that within the first 6 months of having your bees, you will need to treat them for varroa. these strips will treat both brood boxes.

1 x Smoker 25cm
Smokers are an essential tool of the Beekeepers. The Smoke will calm the bees when going through them, allowing you to relax and enjoy the experience.

1 x Kelly Hive tool - 24cm
When going through your hive, the hive tool will make it easy to crack the supers and remove frames for inspection.

If there's something in the package that you already have, get in touch via the form below and we can work out a custom package.

NZ pine Kitset frames at Ideal Height - 136mm High. 35mm end bar.

These are the perfect height for doing cut-comb honey. You can get four 340g squares per frame. Fit 10 frames per box to keep the comb uniform.

The common procedure is to assemble the frames without wire and fit a strip of beeswax foundation in the top groove that will hang about 25mm below the top bar. It is secured in place by running a bead of molten beeswax into the groove. In a good flow, the bees will draw the comb from the top down to give nice perfect comb honey in a uniform shape on each frame. Click here   for the correct thin super foundation and cut each sheet into the desired size strip.

Click here if you need some beeswax.

Our comb honey cutters fit in between the top and bottom bar.

You can purchase Ideal size boxes here

Kitset Queen Excluder rim made in NZ from NZ Pine.

16.5mm Thick.

Made to suit queen excluder mesh.

Want your NZ pine boxes assembled?

Simply add some NZ pine boxes to your cart.

Then if you want some of them assembled, type in how many of them in the quantity and add it to your cart.

Your boxes will be assembled with 50mm staples

Discover Apisolis, the future of beekeeping innovation. Revolutionizing hive inspections, Apisolis provides a modern, healthier alternative to traditional smokers by harnessing the power of gentle and safe vapour.

Key Features:

Comfort: Apisolis excels in user-friendliness. Featuring automatic shut-off for efficiency, it simplifies hive inspections, making them smoother and more enjoyable.

Health: Designed with safety in mind, Apisolis eliminates flames, reducing burn risks and harmful smoke inhalation. Its gentle steam ensures a secure experience for both beekeepers and bees alike. Smoke from fires is carcinogenic and some beekeepers get asthma from the smoke inhalation. Use Apisolis to avoid these health hazards.

Safety: You can't start a fire with an Apisolis! Excellent tool when there is a fire ban. Many forestry companies ban smokers from their forests in summer. Here is the safe answer. Equipped with automatic temperature control and capable of producing uniform output, Apisolis generates vapors only as needed, minimizing accidents during use. 

Durability and reliability: Built to last and is fully repairable with spare parts readily available ensuring a long lifespan and sustained performance.

Low running costs: The tank on the Apisolis holds 15 mls of fragrance and will last for 460 long slow puffs! 

Integral rechargeable battery: Great for a days work. Recharge battery each night after use, or after each tankful of fragrance, whatever comes first. 

Top Quality. Made in France. 

Pack Contents:

This comprehensive pack includes everything needed to begin using Apisolis:

• 1 Apisolis Vaporizer: The core component, featuring innovative, user-friendly design.
• 1 Apisolis Native - 120ml: A specially formulated solution for generating soothing and safe vapor. Click Here  for more solution. The bottle will fill the tank on the Apisolis 8 times.
• 2x Coils: Ensuring extended and reliable use of the vaporizer. Click Here for replacement coils. One coil is required to create the vapour. The second one is a spare part to keep in storage. 
• 1 USB Charger Cord: Convenient for quick charging wherever you are.
• User Guide: With photos included.

Apisolis complements rather than replaces traditional smokers and is ideal for non-aggressive colonies and routine checks. It’s the preferred choice for beekeepers prioritizing health, bee welfare, and environmental impact. Start with Apisolis today for gentler, safer, and more sustainable beekeeping practices.

Excellent tool for AP2 apiary inspectors. Fit a plastic bag over the Apisolis, cut a hole for the nozzle. It can then be used without soiling it with potential AFB contamination. Simply change the bag for each apiary and the bellows don't have to be sterilized. Save heaps of time! 

Apisolis Native fragrance composition: Propylene glycol of plant origin & ECOCERT certified. Active ingredients present in essential oils.

The integral battery is 4400 mAh capacity. A 1 amp charger will take around 4 hours to charge it.

A few examples of accidental fires caused by beehive smokers:-

https://www.nzherald.co.nz/northern-advocate/news/mid-north-beekeeper-taken-to-hospital-after-fierce-scrub-fire/LAKLFMLOEHGYNVLGUWH54OANGA/

https://www.lejsl.com/faits-divers/2014/07/19/les-incendies-detruisent-plus-de-1000-ha-au-nord-de-madrid

https://www.larepubliquedespyrenees.fr/faits-divers/incendie/arbus-un-apiculteur-met-accidentellement-le-feu-a-des-herbes-seches-12076186.php?csnt=19255aae888

https://www.sbsun.com/2022/06/07/hesperia-brush-fire-caused-by-a-beekeepers-smoker-fire-officials-say/

3 Litre top feeder tray with float to stop bees drowning.

Works on any hive and could also serve as a small water feeder outside the hive.

If placed on top of the brood frames, an empty super or a wooden rim (minimum of 60mm high) will be required.

366 x 270 x 55mm high

A top notch reversible extractor for an incredible price.

Swinging baskets in this extractor make extraction a breeze.

With four baskets you can extract both sides of four frames, of honey, without having to take the frames out - you simply just start spinning the opposite way and centrifugal force will take care of the rest.

It fits 3/4 depth frames and full depth frames.

Excellent freight rates NZ wide - Urban addresses only

The extractor is made from 304 Grade Stainless Steel and comes with a honey gate.

Gears are made of metal and will last very well.

Some clients put a 750w electric drill with dual speed and variable throttle on the drive shaft instead of the handle to convert it to electric.

Approx dim when assembled: 850Wx700Lx1200H

Stainless Frame Wire. 0.55mm 6kg Roll

Suits wooden Nuc Boxes.

Inner dimensions of outer lip 226mm x 510mm.

1.5L capacity

Keep the beehives away from the damp grass. The two spigot plates locate 2 feet on each base to keep the bases secure and can't slide.
Better protection in storms and against stock damage.
An extra plywood strip is supplied with each pallet and is placed in front to inhibit grass growth below beehive entrance.

The 100 x 50 runners are H4 treated. The 12mm untreated plywood is dipped in hot Microcrystalline Wax for weather protection.

Dimensions: 830mm x 540mm x 112mm high. Approx 10.6kg.

Assembled with stainless steel screws.

Divider sheets to go between hives on the pallet are availible

Lid with honey gate and vent valve to suit our 30kg pails

Instead of having to put a gate on all the buckets just switch the lid.

66m roll x 12mm wide. 12 rolls per bag

A top quality NZ made heater jacket for the standard 210L Drum 

Fully complies with NZ electrical compliance regulations.

The jacket is fitted with a compact digital temperature controller, providing easy to use, yet precise, temperature control. 0 – 90 degrees Celsius.

It has a 1200w element. 230 volt.

Jacket measures 1990mm x 800mm.

Can be purchased with or without an insulated lid.

Please Note: Shipping for this item can be up to 2 weeks but on average will be 4-6 days. It may also get shipped and invoiced separate to anything else order at the same time.