Newest Products

Crafted from premium 304 grade stainless steel, our queen isolation cage sets the new standard for durability and corrosion resistance in beekeeping equipment. 

Fits one full depth frame with either 33mm or 35mm end bars.

Applications:

1. Queen Breeding: Perfect for queen breeders to ensure optimal larvae age for grafting, facilitating superior queen production.
2. Winter use in warmer climates: Ideal for limiting brood production during winter months, effectively reducing varroa mite reproduction. Reduces the colonies food requirements due to less brood.
3. Swarm control in Spring: The speed of colony growth can be controlled with the use of the cage at specific times to enable the colony to reach peak hive numbers at the start of the honey flow without swarming first.
4. Varroa Control: See the procedure below:-

A. Introduce a clean empty brood frame to the cage.
B. Find the queen and enclose in the cage.
C. Position the cage into the middle of the brood nest.
D. A good queen will lay in virtually every cell within 2 days.
E. After 26-28 days, there will be virtually no capped brood and all mites will be exposed to treatment. Can be 23 – 25 days if there is no drone brood.
F. Vaporize with Oxalic Acid for virtually complete mite elimination.
G. Whenever desired, the frame of brood with queen can be removed from cage and added back to brood nest.
H. The cage can be removed from the hive or left at the side of the brood box with a food frame enclosed until needed.

Specifications.

• 40mm inside width, 48mm outside width.
• 459mm long x 242mm high.
• The top cap is 484mm long.
• The air gap in the mesh is 4.3mm. Bees can take pollen through successfully.
• Has a clip-on cap which is held firmly down when the next box or hive mat is added above it.

Internal hive dimensions must be the Langstroth standard to ensure the cage fits properly and there are no gaps for the queen to escape.

Many beekeepers ensure their queens are marked so they are easy to find for caging when required. The labour cost for this procedure is negligible when compared to the cost of resurrecting colonies killed by varroa mites!

Three-frame cage available here.

As we see more and more varroa resistance to the synthetic miticide strips, beekeepers are turning to organic acids for successful varroa control. There is no evidence worldwide of the mites getting resistant to them. The stainless steel cages are very resilient in an acid environment and will not oxidise and deteriorate like galvanised steel products.

It pays to get quality!

Beehive lid (or roof).

Made from top quality NZ galvanised steel. Hand grip edge at both ends.

Very popular selling roof.

Options include:

0.75mm thick - The roof is made from galvanised sheet metal at 0.75mm thick. This is a heavy duty roof and will last the longest.

Loose Poly Liner - The roof will come with a High Density polystyrene liner that gives it the following advantages:

• reduces condensation on the hive mats
• keeps the hive warmer in the winter
• keeps the hive cooler in the summer
• allows the roofs to stack and transport much more efficiently
  

Two Hand Grips - This is the common style with a lip each end of the roof so you can comfortably remove the lid from the Hive.

Internal dimensions are 409 x 515 x 81 mm

2.44 Kg - .75mm

Special Tool for Caging Queen bees without having to use your hands!

Simply pull the foam out, trap the queen in the pipette hole where the foam was.
Wait till she's walking up in it and put the foam back in place.
Take the smaller white cap out and direct the nozzle into a cage.
Then blow through the foam to send the queen into the cage. See video below:

The latest 2nd Gen Version of the all popular InstantVap has arrived: Meet the InstantVap COMPACT!

Similar to the previous generation, this makes vaporizing oxalic acid (OA) in beehives an absolute breeze, however it is better in many ways!

NEW Design:
With a radical overhaul this unit is a lot smaller, lighter and stronger than the previous unit. Focusing on the essentials, this unit is more practical in the field. The unit sits a lot better with most standard batteries. With only one switch, the unit is simply controlled by an LED light.

Video here of original InstantVap model showing application procedures. (Applies to all InstantVap models).

NEW LED light
This unit is preset to all the right parameters and all you need to do is watch the flashing LED. The light is easy to see even on sunny days. Engraved on the unit is the following guide so you know what your InstantVap is doing:

By simplifying and making all these changes this new generation is available at a more affordable price! 

It is very cheap per application! The Oxalic Acid only costs 1.5 cents per beehive for a 3 gram dose (based on buying a 25kg bag for $120.00 +GST in Feb 2023). Treat 1000 beehives for only $15.00 +GST for materials.

Check out our InstantVap Operational Guide for more info.

Applications & suggested dose rates. (Also view the video. See the link below.)

1. For beehives with solid bases, apply 2g of OA vapour at the bottom entry. Block the entry with a wet towel for 5 - 7 minutes to trap all the vapour in the beehive while treating other beehives. 

2. For beehives with vented bases, use a vent blocker sheet and carry out the same process as stated above. The vent blockers can be removed after 5 - 7 minutes.

3. For beehives with vented bases that are very difficult to block, we recommend that you do a 3 gram dose from the top of the hive. A small notch cut from the rim of the hive mat is excellent for winter ventilation and a great spot to apply the vapour. If the beehive has lots of honey supers, a notch cut from the rim of the queen excluder can give good access for the vaporizer. we sell stainless steel excluders with an entry door which is ideal. See the examples on the video.

4. Alternatively, the vapour can be applied through a hole in the front plate of the brood box for the fastest application. Drill a hole as high as possible in the top brood box but close to the side so the vapour penetrates the hive between the outer wall and outer frame. Drill  a 6.5mm hole if using the brass nozzle bare. Drill a 9.5mm hole if using the silicon sleeve on the nozzle. After application, the hole can be blocked up with a golf tee.

6 Amp/hr 18V Makita LXT Batteries also available here

Respirators must be worn when vaporizing - Check out our range here

Cleaning of these devices is important - Watch our Cleaning Video.

For a quick overview on how the device functions, watch our video.

Included with each Vaporizer:
1 x Vaporizer
1 x Plunger
1 x 500g of OA
2 x Silicone Caps
2 x Silicone Sleeves
2 x Spare O-Rings
2 x Cleaning Caps

The finer details:

• The device has built-in battery protection electronics.
• Power: 18V-20V; 250W; 14A
• Approx. 1Ah is required for heating up, then 1Ah provides enough power for 9 to 10 two gram doses of oxalic acid treatment. Each 2 gram dose takes approx. 18 seconds to vaporize.
• Stainless, acid-resistant steel frame and dispenser
• Pre-set operating temperature: 230℃ / 445F (not adjustable)
• Fast, tool-free, roll-on adjustment of the oxalic acid dispenser, with 1-4 gram scale, dispensing oxalic acid with one push. Replacements or extras are available here They fit perfectly in the handle as well as in the dispenser chamber.
  
• 6mm diameter strong brass outlet pipe, not prone to clogging due to the excellent design. Easy to access and clean in case of a blockage, the entire length of the tube is accessible. Some beekeepers drill a 7mm hole in the hive box and insert the nozzle into the hole.
• Stable in the hive hole, does not fall out or tilt sideways, can support its own weight (But do not lean on it!)
• There should be a minimum of 100mm free space in front of the nozzle otherwise some of the Oxalic Acid will crystalize on the surface and be wasted.
• Double-wall furnace, works well in cold, windy weather

The InstantVap is powered by common power tool batteries including:

• Makita LXT 18V
• Milwaukee M18
• Bosch Blue / ProCore 18V
• Dewalt XR18/20V & FelxVolt Batteries (Note: Power Stack batteries are incompatible)
• Metabo 18V
• Ozito PXC 18V
• AEG Pro 18V 
• HiKOKI / Hitachi 18V
  

The device is compatible with only one type of battery. Please select your type carefully. Price does not include any batteries. 

DC18RD Fast Charging Battery Charger by Makita – the practical solution for powering your Li-Ion batteries.

Fast Charging: Charges two of our 6.0Ah Makita batteries in just 55 minutes 

Built in USB Port: Built-in USB port for charging portable electronic devices

Built-In CPU: The charger's CPU optimizes charging by reading the battery's memory chip, prolonging battery life.

Efficient Cooling: The forced air cooling fan minimizes charging time by maintaining the ideal battery temperature.

Digital Power Display: Monitor battery and charging status with the digital display for informed usage.

240 Volt Model: This charger is a 240-volt model with C-Tick compliance for versatility. Draws 460W

Genuine Makita Product

The cutest little cartons to make our wooden sections even better!

Made from eco friendly cardboard, this is a perfect pair for the cellophane bags to give that complete finish.

Carton measures 110 x 110 x 50mm with a thickness of 0.5mm

Jero Maxant Hive Tool – Premium European Beekeeping Tool

One of the Best Quality Hive Tools Available
The Jero Maxant Hive Tool is trusted by beekeepers worldwide for its strength, durability, and precision design. Made in Europe from tempered high-carbon steel, this tool is built to last season after season.

Why Beekeepers Choose the Jero Maxant Hive Tool

• Tempered High-Carbon Steel – Designed to flex under heavy load without bending or snapping like other tools.

• Maxant / J-Tool Type (270mm High) – A proven design for prying frames, lifting, and scraping with ease.

• Built for Professionals & Hobbyists – Perfect balance of strength and comfort for all beekeepers.

• Effortless Hive Management – Watch our product video to see just how smoothly it works in action.

The Premium Hive Tool Advantage

Unlike standard hive tools, the Jero Maxant is made to handle tough conditions. Its durable steel build and ergonomic design mean less strain, more efficiency, and a tool you can rely on for years.

Top quality vacuum sealed mug, grate for those hot or cold drinks!

Will keep liquid hot or cold most of the day!

590mls Capacity

Great Value for money!

Simply pick your size, and we'll send you a pair of gloves selected at random from our seconds bin. They could be any style from across our range.* 

While these gloves may have minor imperfections, such as incorrect stitching or slight degradation in mold, rest assured they are still fully functional and usable for your beekeeping needs.

Perfect for that second pair as a backup or for friends etc.

Join us in reducing waste and giving these gloves a second life while enjoying the anticipation of discovering the style that awaits you in our lucky dip

*May not be exactly the same but similar

WSP Depth - Your Russian Pine frame will be 183mm high, assembled and wired with brass eyelets on the end bars. WSP depth is used like the 3/4 size frame but in our Technoset 3/4 boxes, as they are slightly higher than the standard 3/4 box and fit these frames. 

Options:

Endbar Size:

33mm - Your Russian Pine frames will be assembled and have an endbar size of 33mm. 33mm Gives you plenty of space in the brood box with 10 frames giving you more flexibility on how you place your frames and also allowing for the wax and propolis build up on the frames. This is often used in brood chambers as they get clogged up the most.

35mm - Your Russian Pine frames will be assembled and have an endbar size of 35mm. 35mm means that 10 frames will fit in a standard super with a near perfect fit. This will give thicker built out frames and also consistent spacing between the frames. This is often used in honey supers to get the thicker frames and more yield.

43mm - Your Russian Pine frames will be assembled and have an endbar size of 43mm. 43mm means that 8 frames will fit in a standard super. This will give thick built out frames and is often used in honey supers to get the thicker frames and more yield. Only available on 3/4 & WSP frames.

Option:

Wired and assembled - your frames will be assembled and wired ready for wax foundation

Plastic foundation fitted - Your frames will come with plastic foundation already fitted, you will just need to coat it with beeswax.

The boxes are Flat Packed and Untreated.

NZ Pine timber. 

These boxes are mostly Standard Grade however there there is the odd knot or pith close to a edge on some pieces. Sometimes the heights can be a few mm out compared to the other pieces but overall still perfectly good boxes 

Top quality vacuum sealed mug, grate for those hot or cold drinks!

Will keep liquid hot or cold most of the day!

590mls Capacity

Top quality vacuum sealed mug, grate for those hot or cold drinks!

Will keep liquid hot or cold most of the day!

590mls Capacity

SS mesh excluder the right size to suit the Technoset Nuc Entries

Great for swarm prevention and keeping the queen in the hive.

Rubber feet to suit the Hivemaster Drip tray pallets and help them grip onto surfaces

Galv screws included to secure them.

Included:
4 x Rubber Feet
4 x Galv Screws

Where a weak hive going into the honey season will typically bring you no honey to harvest, this setup changes all that!

Unlock the Potential of Smaller Colonies:
Beequip 2-in-1 Beehives are meticulously crafted to help beekeepers like you achieve maximum production from smaller colonies. By housing two smaller colonies side by side, you create a dynamic synergy that multiplies their efficiency.

Community Supers for Abundant Honey:
Our innovative design includes community supers, a shared space where your bees collaborate to store honey. This cooperative environment ensures that they harvest more honey than they would individually. 

Simplified Hive Management:
We understand that successful beekeeping requires ease and convenience. With Beequip 2-in-1 Beehives, you can effortlessly check the outer brood box, making colony inspections a breeze. You can also feed and treat for varroa mites.

Package includes:
2 x 2in1 Galv Lids
2 x 2in1 Hive Mats
2 x 2in1 Queen Excluders
1 x 2in1 Slotted 3/4 Super

3/4 Depth super specially made to suit the 2in1 Hive setup.

NZ Pine assembled untreated. Slots for the 2in1 roof.

Find out more about the 2in1 Hive here.

Queen Excluder specially made to suit the 2in1 Hive setup.

Stainless Steel Excluder Grid

Find out more about the 2in1 Hive here.

21mm Rim. 507 x 202 x 21mm

Hive mat specially made to suit the 2in1 Hive setup.

Designed to fit perfectly under the 2in1 Lid.

Find out more about the 2in1 Hive here.

21mm Rim and Oil Tempered hardboard.
507 x 202 x 21mm

Galvanised lid specially made to suit the 2in1 Hive setup.

Designed to be weather tight and fit perfectly over half of the hive.

Find out more about the 2in1 Hive here.

Made from 0.75mm sheet

DC18RC Fast Charging Battery Charger by Makita – the practical solution for powering your Li-Ion batteries.

Fast Charging: Charges our 6.0Ah Makita batteries in just 55 minutes 

Built-In CPU: The charger's CPU optimizes charging by reading the battery's memory chip, prolonging battery life.

Efficient Cooling: The forced air cooling fan minimizes charging time by maintaining the ideal battery temperature.

Digital Power Display: Monitor battery and charging status with the digital display for informed usage.

240 Volt Model: This charger is a 240-volt model with C-Tick compliance for versatility.

Included: Your purchase includes 1 X DC18RC Makita Battery Charger to keep your tools ready for action.

Genuine Makita Product

Congratulations on enrolling in the Land Based Training Apiculture course!

As you will be aware some equipment is provided in the course but not all of the essentials. We have made it easy for you and setup these special packages to provide you with the rest of the essential equipment you will need. The items included are based on feedback from Tutors and what we see best for you.

This package is for people running Full Depth hives and does not include Suit and Gloves. This is for students that have these already or would like to purchase a different style of suit and gloves. 

Included in the package:

1 x Assembled Full Depth Box
These are extra supers for your hive. The frames below will go in these and they will need to go on the hive as it grows. They are untreated and will need painting like the box in your course.

9 x Wooden frames with Medium Brood Wax Fitted
These are for the first wooden box above - they are for the second brood nest. You will build the first brood box in your course. We have done wood and wax as this is the most natural and best for the brood nest. There is only 9 as we are allowing for a frame feeder mentioned below

1 x Full Depth Frame Feeder
This is an essential part of a hive as in winter the hive can use up all its stores and need to be fed Sugar Syrup to stay alive. As mentioned above, we have only done 9 frames for the second brood box so you can fit this in. It may need to be put in your first brood box if your hive is only 1 story high.

1 x SS Queen excluder with wooden rim
When your hive is ready to produce honey you will need to put on the honey super mentioned above. This excluder will go between the brood boxes and the hive to stock the queen going into the honey and laying eggs. you only want honey bees in there!

1 x Emlock Strapper
Keep this around your hive at all times when you are not going through it. it will keep everything secure and tidy.

1 x Pack of 4 Apivar Strips
this is a varroa treatment for your bees. It is normal that within the first 6 months of having your bees, you will need to treat them for varroa. these strips will treat both brood boxes.

1 x Smoker 25cm
Smokers are an essential tool of the Beekeepers. The Smoke will calm the bees when going through them, allowing you to relax and enjoy the experience.

1 x  Hive tool - Kelly or Maxant style will be provided depending on your tutors preference.
When going through your hive, the hive tool will make it easy to crack the supers and remove frames for inspection.

If there's something in the package that you already have, get in touch via the form below and we can work out a custom package.

Congratulations on enrolling in the Land Based Training Apiculture course!

As you will be aware some equipment is provided in the course but not all of the essentials. We have made it easy for you and setup these special packages to provide you with the rest of the essential equipment you will need. The items included are based on feedback from Tutors and what we see best for you.

This package is for people running 3/4 Depth hives and does not include Suit and Gloves. This is for students that have these already or would like to purchase a different style of suit and gloves. 

Included in the package:

1 x Assembled 3/4 Depth Box
These are extra supers for your hive. The frames below will go in these and they will need to go on the hive as it grows. They are untreated and will need painting like the box in your course.

8 x Wooden frames with Medium Brood Wax Fitted
These are for the first wooden box above - they are for the second brood nest. You will build the first brood box in your course. We have done wood and wax as this is the most natural and best for the brood nest. There is only 8 as we are allowing for a frame feeder mentioned below

1 x 3/4 Frame Feeder
This is an essential part of a hive as in winter the hive can use up all its stores and need to be fed Sugar Syrup to stay alive. As mentioned above, we have only done 8 frames for the second brood box so you can fit this in. It may need to be put in your first brood box if your hive is only 1 story high.

1 x SS Queen excluder with wooden rim
When your hive is ready to produce honey you will need to put on the honey super mentioned above. This excluder will go between the brood boxes and the hive to stop the queen going into the honey and laying eggs. you only want honey bees in there!

1 x Emlock Strapper
Keep this around your hive at all times when you are not going through it. it will keep everything secure and tidy.

1 x Pack of 4 Apivar Strips
this is a varroa treatment for your bees. It is normal that within the first 6 months of having your bees, you will need to treat them for varroa. these strips will treat both brood boxes.

1 x Smoker 25cm
Smokers are an essential tool of the Beekeepers. The Smoke will calm the bees when going through them, allowing you to relax and enjoy the experience.

1 x  Hive tool - Kelly or Maxant style will be provided depending on your tutors preference.
When going through your hive, the hive tool will make it easy to crack the supers and remove frames for inspection.

If there's something in the package that you already have, get in touch via the form below and we can work out a custom package.

Congratulations on enrolling in the Land Based Training Apiculture course!

As you will be aware some equipment is provided in the course but not all of the essentials. We have made it easy for you and setup these special packages to provide you with the rest of the essential equipment you will need. The items included are based on feedback from Tutors and what we see best for you.

This package is for people running 3/4 Depth hives and includes a Suit and Gloves

Included in the package:

Assembled 3/4 Depth Box
These are extra supers for your hive. The frames below will go in these and they will need to go on the hive as it grows. They are untreated and will need painting like the box in your course.

8 x Wooden frames with Medium Brood Wax Fitted
These are for the first wooden box above - they are for the second brood nest. You will build the first brood box in your course. We have done wood and wax as this is the most natural and best for the brood nest. There is only 8 as we are allowing for a frame feeder mentioned below

1 x 3/4 Frame Feeder
This is an essential part of a hive as in winter the hive can use up all its stores and need to be fed Sugar Syrup to stay alive. As mentioned above, we have only done 8 frames for the second brood box so you can fit this in. It may need to be put in your first brood box if your hive is only 1 story high.

1 x SS Queen excluder with wooden rim
When your hive is ready to produce honey you will need to put on the honey super mentioned above. This excluder will go between the brood boxes and the hive to stop the queen going into the honey and laying eggs. you only want honey bees in there!

1 x Emlock Strapper
Keep this around your hive at all times when you are not going through it. it will keep everything secure and tidy.

1 x Pack of 4 Apivar Strips
this is a varroa treatment for your bees. It is normal that within the first 6 months of having your bees, you will need to treat them for varroa. these strips will treat both brood boxes.

1 x Standard Bee Suit - Size required. See size chart here.
Our standard suits will keep you protected from sting's allowing you to work with the bees in confidence.

1 x Pair of Gloves. Long Ventilated - Size required. See size chart here.
Our ventilated gloves give optimal protection while having good dexterity when beekeeping.

1 x Smoker 25cm
Smokers are an essential tool of the Beekeepers. The Smoke will calm the bees when going through them, allowing you to relax and enjoy the experience.

1 x  Hive tool - Kelly or Maxant style will be provided depending on your tutors preference.
When going through your hive, the hive tool will make it easy to crack the supers and remove frames for inspection.

If there's something in the package that you already have, get in touch via the form below and we can work out a custom package.

Congratulations on enrolling in the Land Based Training Apiculture course!

As you will be aware some equipment is provided in the course but not all of the essentials. We have made it easy for you and setup these special packages to provide you with the rest of the essential equipment you will need. The items included are based on feedback from Tutors and what we see best for you.

This package is for people running Full Depth hives and includes a Suit and Gloves

Included in the package:

1 x Assembled Full Depth Box
These are extra supers for your hive. The frames below will go in these and they will need to go on the hive as it grows. They are untreated and will need painting like the box in your course.

9 x Wooden frames with Medium Brood Wax Fitted
These are for the first wooden box above - they are for the second brood nest. You will build the first brood box in your course. We have done wood and wax as this is the most natural and best for the brood nest. There is only 9 as we are allowing for a frame feeder mentioned below

1 x Full Depth Frame Feeder
This is an essential part of a hive as in winter the hive can use up all its stores and need to be fed Sugar Syrup to stay alive. As mentioned above, we have only done 9 frames for the second brood box so you can fit this in. It may need to be put in your first brood box if your hive is only 1 story high.

1 x SS Queen excluder with wooden rim
When your hive is ready to produce honey you will need to put on the honey super mentioned above. This excluder will go between the brood boxes and the hive to stop the queen going into the honey and laying eggs. you only want honey bees in there!

1 x Emlock Strapper
Keep this around your hive at all times when you are not going through it. it will keep everything secure and tidy.

1 x Pack of 4 Apivar Strips
this is a varroa treatment for your bees. It is normal that within the first 6 months of having your bees, you will need to treat them for varroa. these strips will treat both brood boxes.

1 x Standard Bee Suit - Size required. See size chart here.
Our standard suits will keep you protected from sting's allowing you to work with the bees in confidence.

1 x Pair of Gloves. Long Ventilated - Size required. See size chart here.
Our ventilated gloves give optimal protection while having good dexterity when beekeeping.

1 x Smoker 25cm
Smokers are an essential tool of the Beekeepers. The Smoke will calm the bees when going through them, allowing you to relax and enjoy the experience.

1 x  Hive tool - Kelly or Maxant style will be provided depending on your tutors preference.
When going through your hive, the hive tool will make it easy to crack the supers and remove frames for inspection.

If there's something in the package that you already have, get in touch via the form below and we can work out a custom package.

Similar to the other nozzle we sell yet in metal! This will last!

These nozzles cope with the high workload of beekeeping work and will stand up to the pressure.

Has a hand-grip click lock system and a 25 mm swivel connector fitted. (With female thread)

Wash daily with warm water to maximize life.

Buy  delivery hose  to suit.

All the equipment required for the course in one special package!

This includes everything as per the requirements apart from the Nucleus Beehive - we recommend sourcing this locally if possible. Books are also required and you can purchase them here

Included in the package:

1 x Standard Bee Suit - Size required. See size chart here.
1 x Pair of Gloves. Long Ventilated - Size required. See size chart here.
1 x Smoker 25cm
1 x Maxant Hive tool - 27cm
1 x Kitset Commercial Base - H4 Runners
1 x Full Depth Kitset Box - RP Timber
2 x 3/4 Depth Kitset Box - RP Timber
10 x Full Depth kitset frames - 33mm endbars
20 x 3/4 Depth Uncoated Plastic Frames - 33mm endbars
11 x Full Depth Beeswax Foundation sheets - Medium Brood
1 x Raw Beeswax 1kg block 
1 x Full Depth 3.5L Frame Feeder
1 x Assembled Hivemat
1 x SS Queen excluder with wooden rim
1 x Galvanised Roof
1 x Mouse Guard inc screws to suit
1 x Emlock Strapper
1 x Pack of Nails for Frames
1 x Pack of Screws for Boxes
1 x Roll of Frame Wire - 250g

If there's something in the package that you already have, get in touch via the form below and we can work out a custom package.