Electric Drill Press (DP) Model with slotted brass head
740-0200
Price excludes GST
Heavy Duty Electric Drill Press Beehive Brander
As you may or may not know, MPI have release a Notice to do with Exporting Honey that contains following:
""Beekeepers must permanently mark all honey boxes presented for extraction with the beekeepers allocated identification code under the AFBPMP or a different code which achieves equivalent or better identification""
This rule came into effect on the 11th of December 2018.
Get your Hives compliant using our Branders Now!
- 240v 400w Element
- Doesn't cool down quickly when in use
- Fit to a Drill Press or to a Beequip Brander Press
- Very efficient way of branding frames and boxes
Our branders have FULL Certification to NZ and AUS Electrical Safety Standards
CHARACTERS ARE NOT INCLUDED - 20mm Brass Characters recommended (extra)
Check out the following:
- Video 1
- Video 2
Kids Trousers
700-12W-S
Price excludes GST
Children Bee Trousers
Come in Small, Medium and large.
2in1 Hive - Galv Lid
792-1052
Price excludes GST
Galvanised lid specially made to suit the 2in1 Hive setup.
Designed to be weather tight and fit perfectly over half of the hive.
Find out more about the 2in1 Hive here.
Made from 0.75mm sheet
Q4 Queen Mating Nucleus
950-0083
Price excludes GST
4 Small Nucleus hives all under one roof.
Made from high quality Technosetbee components.
Dividers can be remove to create a Std 6 frame full depth - top feeder can be purchased to suit.
Colours may be different to the pictures shown.
There are Two Options Available:
Without Frames:
- Lid
- Top Feeders
- Dividers
- Latches
- Super
- Vented base
With Wooden Frames
As above but with 12 wooden frames and with wax coated plastic foundation fitted to the frames. (Code 950-0183)
Alternative frames can be purchased here
Latch Extensions
950-0012.2
Price excludes GST
20mm Latch Extensions to use with our latch kits.
Sold per pair.
Wooden Frames for 4 way Nuc
801-2512
Price excludes GST
Assembled and fitted with Wax Coated Plastic Foundation
12 Volt Battery - 18Ah
780-0071
Price excludes GST
Sealed Battery
Not for Commercial Vaporizing - Commercial Vaporizer available here
The 18ah will do 20-30 2min sessions before needing a recharge.
Click Here to buy the Vaporizer
Click Here to buy a Battery Charger for these batteries.
To modify Q8 to take Communal Super below.
950-0051C
Price excludes GST
Purchase this and we will prepare 1 of your Q8 queen mating nucleus beehives to suit a community super being placed under it.
This involves:
- Fitting an extra Q8 entrance.
- Locate and secure the center partition.
Standard Oxalic Acid & Glycerine REFILL Package
751-0011
Price excludes GST
Got the Standard package but running low on supplies? This refill pack will keep you going. The standard refill pack isn't enough? Try our Plus Refill Package here.
Effective cost per strip is only 22 cents +GST total!
This package includes the following: -
5120 x Beequip strips
75kg x Glycerine
50kg x Oxalic acid
Bags to store soaked strips are available here.
Unfortunately this package may exceed the website shipping capacity - in this case simply request a quote from the cart page after adding it to your cart.
6 Frame Reversible Extractor
750-0646
Price excludes GST
This 6 Frame Reversible Extractor is a powerhouse of extraction with a programmable three-phase inverter motor for total control, enabled by a simple speed controller and digital readout. Its 304-grade stainless steel and clear lids are solidly constructed, and it has over 100 settings for flexible operation. An ideal choice for speedy extraction with reliable, consistent results.
A simple speed controller with a digital readout of revolutions and with forward/reverse buttons, gives you accurate control on the extraction and keeps it consistent. Read outs on the voltage, amps and hertz are also available.
The inverter motor is three phase with the the control unit converting the single phase input to three phase in order to have full control of the motor. With over 100 settings, the controller is very flexible if needed otherwise it operates as a simple straight forward extractor.
Check out the Instruction Manual Here
The machine is made from 304 grade stainless steel and has clear lids.
Approx dim when assembled: W780x880Lx1150H
The distance from honey gate to floor when the legs are fitted is 310mm.
Requires a std single phase 240v power supply.
Honey Gate to suit Heated Tank
750-0620.1
Price excludes GST
V-Gate SS Queen Excluder
750-0516.21-SVG
Price excludes GST
A wooden-rimmed stainless steel queen excluder with the option of a closable entry and the new V-Gate port.
Ideal for beekeepers wanting a durable, long-lasting excluder for acid treatment systems, two-queen setups, or simply the flexibility of a second entrance.
This product is currently available for pre-order. Stock is due in August, subject to transit time.
The V-Gate is a dedicated vaporizing access point built into a compatible 21mm rim. It is designed to make oxalic acid vaporization application easier, cleaner and more consistent, without needing to alter the brood box itself.
Instead of pushing a vaporizer through timber, the V-Gate uses a metal-on-metal plate design to help reduce wear, maintain better nozzle alignment and reduce nozzle chilling during repeated use.
A large number of beekeepers now use Swedish Cloth strips on top of the brood frames. The 21mm rim gives the correct bee space between the strips and the excluder mesh for maximum efficacy. Beekeepers report they get minimal burr comb on the excluder mesh if they use the cloth strips during the honey flow.
The rims are assembled with 38mm stainless-steel pancake-head screws for maximum strength and longevity.
As acid treatments become more common, rusty galvanised queen excluders can become a real hassle. This excluder uses stainless steel, making it a better long-term choice for beekeepers using acid treatment systems.
Be sure to read our blog post on why stainless steel matters for excluders: Click here to view.
The wooden rim is dipped in microcrystalline wax to help protect it from rot and increase service life.
The wooden rim is left untreated for beekeepers who prefer an undipped finish.
Standard wooden-rimmed stainless steel excluder with no closable entry gate.
Fitted with a closable entry on the front of the excluder. Ideal where front access is preferred.
Fitted with a closable entry on the side of the excluder. Ideal where side access suits your hive setup.
Fitted with the V-Gate vaporizing port on the front of the excluder for front access during treatment.
Fitted with the V-Gate vapour port on the side of the excluder for side access during treatment.
The entry gate and V-Gate cannot be fitted in the same position on the excluder.
We also have excluders with a stainless steel rim available.
V-Gate Hive Mat
790-0011-FVG-W
Price excludes GST
Top Quality Hive Mat assembled in NZ — now available with V-Gate.
This NZ-assembled hive mat is built with a 21mm thick wooden rim and durable 4mm plywood centre board. Choose the standard version, or upgrade to the new V-Gate vapour port for easier, cleaner and more consistent oxalic acid vaporization.
The V-Gate is a dedicated vaporizing access point built into the 21mm rim. Instead of pushing a vaporizer through timber or using temporary access points, the V-Gate uses a metal-on-metal plate design to help reduce wear, maintain better nozzle alignment and make repeat treatments faster and more reliable.
It is recommended to drill a 10mm hole in the lid to align with the V-Gate so that the lid does not need to be removed for vapour applications.
Stock due August.
This product is currently available for pre-order. Orders placed now will be supplied once stock arrives in August.
| Assembly | Assembled in NZ. |
|---|---|
| Size | 507mm x 407mm. |
| Frame | 21mm thick wooden frame. |
| Board | 4mm plywood. |
| Carton quantity | 15 per carton. |
| Rim material | The rim is made from Russian Pine — very strong and durable. |
| Edges | Radiused outer edges for comfortable handling. |
| Corner assembly | Each corner has one pancake head stainless screw for a secure assembly. |
Treated — the wooden rim has been dipped in hot micro-crystalline wax prior to assembly, making it far more durable and longer lasting.
Untreated — the Russian Pine rim is left in its natural untreated state.
V-Gate Front — fitted with the V-Gate vapour port on the front of the hive mat for front access during treatment.
V-Gate Side — fitted with the V-Gate vapour port on the side of the hive mat for side access during treatment.
Standard Swedish Cloth REFILL
751-0047.R
Price excludes GST
Stay prepared with the Swedish Cloth Standard Kit, ideal for large-scale beekeepers or those looking for long-term hive maintenance solutions. This bulk kit includes everything you need to make thousands of Swedish cloths, ensuring your hives remain healthy and productive.
Remember to mix your solution 50/50 for these strips
Click here for more info on the Swedish Cloths
Click here to view our instruction guide.
What’s Included in the Standard Kit?
Why Choose the Standard Kit?
This comprehensive kit is designed for serious beekeepers who want a ready supply of Swedish cloths to support their hive management needs.
NOTE: this may exceed our websites shipping capability. Please request a quote and we will get back to you as soon as we can.
Heavy Duty Auto Hose Reel - 20m
920-0915
Price excludes GST
These high quality hose reels are an excellent way for getting your syrup from the tank to the beehive while keeping everything in a tidy orderly fashion. We know that these are put under great pressure when used by beekeeping staff therefore we didn't stop until we found ones of exceptional quality.
On each rotation, the reel has a click position where it can lock to prevent rewinding back. To release, pull hose out a small amount to release, then retract the hose on the reel.
Specifications:
Auto Retract Hose Reel with 20 metres of 20mm delivery hose and a dispenser nozzle fitted. Has a 25mm inlet fitting.
Due to the weight of sugar syrup, we recommend that the reel is mounted on a flat surface like as shown in the photo. Not mounted on a vertical surface.
Shipping AU
Price excludes GST
Pheromone Sheet to Suit Technoset Hives
950-0210
Price excludes GST
For colonies with 2 queens.
Put this next to the queen excluder to reduce the amount of pheromone transfer between boxes to help have a happy hive with two queens
Single Charger for Makita 18v Battery.
760-0048
Price excludes GST
DC18RC Fast Charging Battery Charger by Makita – the practical solution for powering your Li-Ion batteries.
Fast Charging: Charges our 6.0Ah Makita batteries in just 55 minutes
Built-In CPU: The charger's CPU optimizes charging by reading the battery's memory chip, prolonging battery life.
Efficient Cooling: The forced air cooling fan minimizes charging time by maintaining the ideal battery temperature.
Digital Power Display: Monitor battery and charging status with the digital display for informed usage.
240 Volt Model: This charger is a 240-volt model with C-Tick compliance for versatility.
Included: Your purchase includes 1 X DC18RC Makita Battery Charger to keep your tools ready for action.
Genuine Makita Product
Plus Oxalic Acid & Glycerine REFILL Package
751-0012
Price excludes GST
This package has been especially set up for beekeepers who have bought the Plus package in the past or who want to save money and buy bulk.
This package includes the following: -
16000 x Beequip strips
250kg x Glycerine
175kg x Oxalic acid
Effective Cost per strip is 20 cents +GST total.
Bags to store soaked strips are available here.
Unfortunately this package may exceed the website shipping capacity - in this case simply request a quote from the cart page after adding it to your cart.
External Entry for the SpyHive™
880-0010
Price excludes GST
This is a cleverly designed entrance for our SpyHive™!
It is designed to reduce robbing while giving the bees an easy hygienic landing board.
There are two types available:
Flat wall type:
This is designed to be screwed against a flat wall and then sealed across the top
Profiled Wall Type:
This has an edge of which you can cut to suit the profile of the wall it's going against e.g. corrugated iron.
Check out the installation video which shows the profiled wall type in use.
Box Cracker™ Escape Tool
850-0095
Price excludes GST
Using this alongside the Box Cracker™ Tool, you have the ability to put bee escapes on your hive without even taking your honey supers off!
Takes up to 40mm thick Bee Escapes
Check out the video below which shows it in use.
Made inhouse from top quality materials and protected with a durable powder coating.
This tool is built to last and will save you or your team hours of back breaking work.
Plastic Foundation for Q4 Wooden Frames Frames
901-0107
Price excludes GST