Acidic Treatments

Oxalic Acid Dihydrate Crystals. 99.5% 

Oxalic Acid is used by many different industries for many different applications.

• Beekeepers.
• Exterior timber deep cleaning and preparation.
• Commercial laundries. Rust and mineral deposit remover on fabric.
• Building and construction cleaning. Mineral staining, grout, mortar, bricks, tiles, pavers.
• Professional carpet cleaning. Rust and mineral stain removal.
• Rust, scale and watermark removal from baths, basins and other washroom surfaces.
• Hardwood stain removal on concrete and carpet
• Waterlines and deposits on boat hulls and marine applications

Many beekeepers use Oxalic Acid with our Vaporizers

We also sell Glycerine and cardboard or paper strips

500g pottles, 2kg pottles or 25kg Bags

Ensure to reading safety instructions before opening container.

Click here to view our mixing guide for oxalic acid and glycerine

Check out our packages here, with everything you need to get started including Oxalic Acid

Top quality glycerine. 

Derived from palm, this product conforms to USP43, which means it is suitable for food and pharmaceutical applications.

Check out our packages here, with everything you need to get started using Oxalic acid and Glycerine in your hives.

The perfect package for those wanting to give our popular Beequip Strips a try, but only need a small quantity. Containing almost everything you need to get up and running, we have made it easy for you to get stuck in.

The package includes enough ingredients to soak 160 strips.

A Refill kit  to suit this package is available when you run out of strips. Or you can buy in bulk!

This package includes:

•    Small soak tub
  -    4-litre pail and lid
  -    3kg Glycerine
  -    2kg Oxalic Acid (OA)
  -    4 bundles of 40 Beequip Strips. (160 total)
  -    4 Zip-lock Bags for Soaked Strips
  -    Digital thermometer
  -    Wooden trivet & stirrer
  -    Instruction booklet - View ONLINE here

Find out more about Oxalic Acid on our Blog here.

Food grade high density cardboard. 11g.
Can be soaked in Oxalic Acid  and Glycerine  Solution.
30mm x 388mm with 2 creases for easy folding
Soaks up 23 grams of product.

Minimum order of 20 strips
80 per bundle, 1280 per carton

Check out our packages here, with everything you need to get started, including these....

Soaker crates - available for easy soaking of the strips.

Bags to store soaked strips available here.

The strips are packed in bundles of 80 because that is the ideal number for each slot in the soaker crate. The soaker crates have 6 slots and can soak 480 strips at a time. Check out the video below for a comprehensive overview of our strips:

Beekeepers have been using Oxalic Acid mixed with Glycerine all over the world for many years. They have found it extremely beneficial to the health of the colony. It can be used at any time of the year and the secret to its effectiveness is to maintain regular treatments.

Beequip run their own beehives for research and development and all the staff at Beequip have beekeeping experience. Oxalic acid solutions have been extensively researched and tested to maximise the results. The current economic challenges require most beekeepers to look at reducing costs wherever possible. The cardboard strips are extremely environmentally friendly when it comes time for disposal, as compared to the millions of plastic strips that are used in the industry, and end up in land fill. 

Click here to view our mixing guide for oxalic acid and glycerine

12 volt Oxalic Acid Vaporizer

150w element

Internal cord for easy of use.

Repeat every 4 days for 2 brood cycles to kill any mites that come from capped cells. Alternatively use our Queen Cage Frame to create a period when there is no capped brood. If there is no capped brood, one good application early in morning or late in evening when all the field bees are there will kill virtually all the mites.

Click Here for a battery to use

Click Here for Instructions

Have you got the hobbyist kit but running low on supplies?

Grab this handy little refill kit to keep you going.
Done at a special price and cheaper than buying individually!

- 3kg Glycerine
- 2kg Oxalic Acid (OA)
- 4 bundles of 40 Beequip Strips. (160 total)
- 4 Zip-lock Bags

For efficient Varroa Mite control in beehives when using Oxalic Acid for treatment.

Check out our Blog Post on Brood Breaks in Hives

Two size options available:
- Full Depth
- 3/4 Depth

Oxalic acid treatments do not usually kill the mites that are inside capped brood cells. There is now a very efficient and effective solution!

Lock the queen in this cage to create a brood break period. Treat the hive with Oxalic Acid while there is no capped brood and achieve a very high Varroa kill rate.

See Data Sheet of testing done on this

Oxalic acid can be applied by vaporization, fogging or by the dribble method.

Check this link for more info:-

http://scientificbeekeeping.com/oxalic-acid-questions-answers-and-more-questions-part-1-of-2-parts/

Due to its large size the bees don't feel queenless and are less likely to build queen cells. It has queen excluder sides so that nurse bees can still enter the cage and care for the queen.

There is a large opening under the top cap to release the bees when required. Only 25mm wide at the top and will fit in a standard brood box along with 10 frames with 33mm end bars. The main body of the frame is only 16mm wide so as not to interfere with brood emerging alongside.

The bottom edge is curved on the full depth cage to match the typical shape of the winter cluster.

There are many other applications.

In warmer locations, the queen can be locked up over winter to stop her laying eggs to conserve stores and to stop the Varroa mites from breeding.

Can also be used to bank an extra queen over winter when running 2 queen colonies and the bees are already familiar with 2 queens in the hive.

We recommend that clients add a small piece of wood as shown, if using the cage over winter. The wood is naturally the warmest material for the queen to rest on, while being surrounded by nurse bees.

The suggested wood dimensions as shown, are 20mm x 10mm x 110mm long.
(Tip: - The bottom bar on a beehive frame is often 20mm x 10mm section.)
Wood at 10mm thick is a firm fit, but we still recommend that one or 2 screws are fitted to keep it secure and in the best place. The top cap unclips to allow easy access for the strip of wood.

The top bar is 480mm long. Cage height is 228mm for full depth brood boxes and 175mm high for 3/4 depth.

Top quality product made in Europe from food grade polypropylene.

Stock supplied may be a different colour to what is shown in the photos.

ENSURE YOU SELECT THE CORRECT BATTERY TYPE BEFORE ADDING TO CART.

The InstantVap LITE 18V is a revolutionary, lightweight, and compact cordless oxalic acid vaporizer, perfect for small-scale beekeepers looking to simplify Varroa mite treatments. Designed with efficiency, durability, and practicality in mind, the InstantVap LITE offers all the performance you need for up to 20 colonies. It is full commercial quality like the Compact model but has an economy heating system to conserve battery power and hence the reason for slightly longer cycle times.

or click here to watch the Short Video.

Video here of original InstantVap model showing application procedures. (Applies to all InstantVap models).

Key Features

Battery Compatibility

The vaporizer is dispatched with a battery connector plate to suit one type of battery only. Choose from a range of popular battery options below:-

• Makita LXT 18V
• Milwaukee M18
• Bosch Blue ProCore 18V
• Bosch Green Power4All 18V
• Dewalt XR 18/20V FlexVolt 20/60V or 18/54V (Note: Power Stack batteries are incompatible)
• AEG 18V 
• Hikoki / Hitachi 18V
• Black+Decker 18V
• Ozito 18V
• Metabo 18V

Note: Batteries are not included.

Smart LED Feedback

Stay in control with a simple, intelligent LED system:

• Slow blink: Warm-up
• Steady-on: Ready for dosing
• Fast blink: Vaporizing in progress
• Double blink & pause: Battery discharged

Innovative Design

• Acid-Resistant Materials: Built with stainless steel, aluminium and brass for durability and easy maintenance.
• Dynamic Temperature Control: Prevents overheating and eliminates waiting for cooldowns.
• Adjustable Dispenser: A tool-free, roll-on design with a 1-4 gram scale for precise dosing.
• Optimized Brass Spout: A straight, 6mm diameter design ensures no pipe bends, reducing clogs. Easy to clean and replace.
• Stable Operation: Fits snugly into a 6.5mm hive hole, supporting its weight without tilting.

Durable, Safe, and Reliable

Designed for cold, windy conditions, the InstantVap LITE features a double-wall furnace for consistent performance. Its deep discharge protection shuts the device down at 15.4V to prevent battery damage.

With CE certification and a robust build of acid-resistant stainless steel and brass, the InstantVap LITE ensures user safety and long-lasting reliability. The compact, lightweight design makes it ideal for hobbyists or small-scale beekeeping operations, offering unmatched convenience and practicality for Varroa treatments.

NB. Minimum of 100mm of free air space is recommended in front of the outlet nozzle to prevent the oxalic acid from solidifying on surfaces.

Why Choose InstantVap LITE?

• Lightweight and portable for easy field use.
• Low cost per treatment—just cents per hive!
• Compatible with most popular power tool batteries.
• Engineered to last, with minimal maintenance required.

Treat your colonies easily and efficiently – get your InstantVap LITE today! 

6 Amp/hr 18V Makita LXT Batteries also available here

Respirators must be worn when vaporizing - Check out our range here

We highly recommend giving our Blog article a read - Field Trial with InstantVap

Technical Specifications

• Power: 18V-20V; 145W; 8A
• Battery Requirements: 0.5Ah for heating, 1.5Ah for 10 treatments
• Treatment Time: 50-60 seconds per 2-gram dose
• Operating Temp: 230°C.
• Materials: Stainless steel frame, brass spout
• Weight: Lightweight and portable. 700g excluding battery.
• Spout Diameter: 6mm, requires a 6.5mm hive hole
• Operating Temperature Control: Pre-set, dynamic regulation
• Package Includes:
  • InstantVap LITE with selected battery socket
  • 1 Oxalic Acid Dispenser
  • 1 Cleaning Cap
  • 1 Spare O-ring
  • 2 Silicone Sleeves
• Warranty: 1 year with post-warranty repair available
• Certifications: CE certified
• Country of Manufacture: Designed and made in Hungary

The latest 2nd Gen Version of the all popular InstantVap has arrived: Meet the InstantVap COMPACT!

Similar to the previous generation, this makes vaporizing oxalic acid (OA) in beehives an absolute breeze, however it is better in many ways!

NEW Design:
With a radical overhaul this unit is a lot smaller, lighter and stronger than the previous unit. Focusing on the essentials, this unit is more practical in the field. The unit sits a lot better with most standard batteries. With only one switch, the unit is simply controlled by an LED light.

Video here of original InstantVap model showing application procedures. (Applies to all InstantVap models).

NEW LED light
This unit is preset to all the right parameters and all you need to do is watch the flashing LED. The light is easy to see even on sunny days. Engraved on the unit is the following guide so you know what your InstantVap is doing:

By simplifying and making all these changes this new generation is available at a more affordable price! 

It is very cheap per application! The Oxalic Acid only costs 1.5 cents per beehive for a 3 gram dose (based on buying a 25kg bag for $120.00 +GST in Feb 2023). Treat 1000 beehives for only $15.00 +GST for materials.

Check out our InstantVap Operational Guide for more info.

Applications & suggested dose rates. (Also view the video. See the link below.)

1. For beehives with solid bases, apply 2g of OA vapour at the bottom entry. Block the entry with a wet towel for 5 - 7 minutes to trap all the vapour in the beehive while treating other beehives. 

2. For beehives with vented bases, use a vent blocker sheet and carry out the same process as stated above. The vent blockers can be removed after 5 - 7 minutes.

3. For beehives with vented bases that are very difficult to block, we recommend that you do a 3 gram dose from the top of the hive. A small notch cut from the rim of the hive mat is excellent for winter ventilation and a great spot to apply the vapour. If the beehive has lots of honey supers, a notch cut from the rim of the queen excluder can give good access for the vaporizer. we sell stainless steel excluders with an entry door which is ideal. See the examples on the video.

4. Alternatively, the vapour can be applied through a hole in the front plate of the brood box for the fastest application. Drill a hole as high as possible in the top brood box but close to the side so the vapour penetrates the hive between the outer wall and outer frame. Drill  a 6.5mm hole if using the brass nozzle bare. Drill a 9.5mm hole if using the silicon sleeve on the nozzle. After application, the hole can be blocked up with a golf tee.

6 Amp/hr 18V Makita LXT Batteries also available here

Respirators must be worn when vaporizing - Check out our range here

Cleaning of these devices is important - Watch our Cleaning Video.

For a quick overview on how the device functions, watch our video.

Included with each Vaporizer:
1 x Vaporizer
1 x Plunger
1 x 500g of OA
2 x Silicone Caps
2 x Silicone Sleeves
2 x Spare O-Rings
2 x Cleaning Caps

The finer details:

• The device has built-in battery protection electronics.
• Power: 18V-20V; 250W; 14A
• Approx. 1Ah is required for heating up, then 1Ah provides enough power for 9 to 10 two gram doses of oxalic acid treatment. Each 2 gram dose takes approx. 18 seconds to vaporize.
• Stainless, acid-resistant steel frame and dispenser
• Pre-set operating temperature: 230℃ / 445F (not adjustable)
• Fast, tool-free, roll-on adjustment of the oxalic acid dispenser, with 1-4 gram scale, dispensing oxalic acid with one push. Replacements or extras are available here They fit perfectly in the handle as well as in the dispenser chamber.
  
• 6mm diameter strong brass outlet pipe, not prone to clogging due to the excellent design. Easy to access and clean in case of a blockage, the entire length of the tube is accessible. Some beekeepers drill a 7mm hole in the hive box and insert the nozzle into the hole.
• Stable in the hive hole, does not fall out or tilt sideways, can support its own weight (But do not lean on it!)
• There should be a minimum of 100mm free space in front of the nozzle otherwise some of the Oxalic Acid will crystalize on the surface and be wasted.
• Double-wall furnace, works well in cold, windy weather

The InstantVap is powered by common power tool batteries including:

• Makita LXT 18V
• Milwaukee M18
• Bosch Blue / ProCore 18V
• Dewalt XR18/20V & FelxVolt Batteries (Note: Power Stack batteries are incompatible)
• Metabo 18V
• Ozito PXC 18V
• AEG Pro 18V 
• HiKOKI / Hitachi 18V
  

The device is compatible with only one type of battery. Please select your type carefully. Price does not include any batteries. 

65% Formic Acid – Ready for Nassenheider Evaporators

Important: Formic Acid can't be shipped to rural addresses. See shipping details at the bottom of this page or contact us to discuss your options. Shipping may take a few extra days.

Temporary Shipping Delay: We are currently experiencing delays of 2 to 3 weeks for delivery. We appreciate your patience while we resolve this.

For Use with Nassenheider Evaporators

This 65% Formic Acid solution is prepared for use with the Nassenheider Professional Evaporator, enabling slow and consistent evaporation over approximately 20 days. Designed for easy handling and consistent performance in temperature-controlled applications.

Key Features:

• Pre-Mixed 65% Solution – No dilution or mixing required
• Steady Release Profile – Suited to devices such as the Nassenheider Evaporator
• Available in Two Sizes – Choose between 1.15kg bottles or 23kg drums
• Compatible with Common Application Devices – Used in both professional and hobbyist settings

Available Sizes:

• 1.15kg Bottle – Ideal for small-scale applications
• 23kg Drum – Suitable for bulk or repeated use

Application:

Add the required amount to your Nassenheider Evaporator following the manufacturer’s instructions. Evaporation may occur over a period of approximately 20 days depending on environmental conditions. Always follow all safety and handling guidelines.

Safety Guidelines:

• Wear protective gloves and safety goggles when handling
• Use in a well-ventilated area away from heat and sunlight
• Keep out of reach of children and animals
• Store upright in a cool, dry location

Shipping Information

Formic Acid is classified as a Dangerous Good (DG), and special transport conditions apply:

1.15kg Bottles:

• Ships via courier to urban addresses only (no rural delivery)
• Up to 6 bottles can ship in one parcel for the same DG charge

23kg Drums:

• Must be shipped via truck to urban business addresses only
• Freight costs are better value for 4+ drums per shipment

Freight Estimation:

After adding items to your cart, proceed to checkout to view the estimated shipping cost. If the rate looks high, return to your cart and submit a quote request for a more accurate freight price.

Need help? Contact us for assistance with bulk shipping or delivery options.

⚠ Disclaimer

This product is not advertised or sold for any agricultural compound use as defined under the ACVM Act 1997, including but not limited to the treatment or control of Varroa mites. If you require a registered product for such use, please consult an appropriate registered compound or seek professional advice.

Swedish Cloth is used extensively by beekeepers in USA to keep their beehives healthy.

It is an excellent matrix for absorbing Oxalic Acid / Glycerine solution.

The Beequip Swedish Cloth is a high-quality product made in Germany, consisting of 70% cellulose, 30% cotton, and is 100% biodegradable.

Click Here to see our Biodegradable Report.

Click Here to see our Material Test Report.

The BQ Swedish Cloth does not contain colouring additives or flame retardant chemicals found in other products.

BioGro has approved it for Organic Beekeepers.

The cloth is pre-cut into strips suitable for beehives. Each dry cloth strip measures 195mm x 43mm x 2mm and weighs approximately 2.4 grams.

A dry strip will soak up 25 grams of OA / Glycerine solution, swelling to approximately 195mm x 47mm x 4mm.

Click here to purchase a full setup kit for hobbyists.

Hobbyist Refill and Standard Refill kits are available.

Important: Research from clients in the USA states that four strips are more effective than using a single pad with the same surface area. Having 260% more edge line significantly improves efficacy.

Packed 4000 per carton, 80,000 per pallet.

Directions:

Prepare a solution comprising 50% Oxalic Acid Dihydrate and 50% food-grade glycerine by weight. See detailed instructions and videos in the mixing guide. Beequip Cardboard strips are soaked in a solution of 40% Oxalic Acid, whereas Swedish Cloth strips use a 50% solution. Note that a 50% OA/Glycerine solution takes slightly longer to dissolve and mix properly.

While the solution is around 54–58°C, soak each strip with approximately 25 grams of solution. Place the strips on their edges in a flat-bottomed soak bin, ideally in a warm place (20–30°C). Strips absorb the solution fully within 60 minutes. Allow the bin to stay in a warm place for 24 hours to equalise the solution distribution. When cooled to room temperature, the solution will solidify within each strip.

The strips can then be used immediately or packed into airtight ziplock bags for long-term storage.

A typical strong colony with two brood boxes should have four strips placed horizontally between the brood boxes, leaving spaces between the strips.

Scrape off burr comb first.

The four strips work more effectively than using a single larger pad.

Click here to view our full instruction guide.

Caution:

Reports from the USA indicate that this system is extremely effective when placed horizontally between the brood boxes in double brood box hives. However, it is less successful over single brood box colonies.

Randy Oliver (scientificbeekeeping.com) agrees with this observation, advising that OAE strips be fitted vertically over the frames when used in single brood box colonies, similar to our cardboard strips. See Beequip Cardboard Strips for reference.

Fun fact: Bees maintain an environment in the brood nest that is ideal for the cloth’s effectiveness, maintaining a temperature near 34°C and humidity between 58%–70%. This controlled environment is absent above a single brood box colony.

Strip Life: The lifespan of strips depends on bee activity such as propolis coating and chewing. Replace strips every 8–12 weeks, or every 10 weeks in cases of significant mite re-invasion, particularly during Autumn.

This Package is specially suited to top up your supplies when getting low after using our Basic Setup Kit.

Effective Cost per strip is 30 cents +GST total.

This package includes the following: -
1280 x Beequip strips
25kg x Glycerine
25kg x Oxalic acid

Bags to store soaked strips are available here.

Keen to set yourself up with everything to make oxalic acid and glycerine strips?
Our basic package include all the tools and ingredients to make it work.

These packages are set up to suit with the applicator being the Beequip strip. You can learn more about these strips here.

Check out our Refill Pack for this package

This package includes the following: -
1280 x Beequip strips
25kg x Glycerine
25kg x Oxalic acid
1 x Soak tub
1 x 27 litre Bare tub
1 x Mixing guide

Bags to store soaked strips are available here.

Find out more about Oxalic Acid on our Blog here.

Soak Tub for Oxalic Acid & Glycerine with clip on lid.
27 litre capacity with rack for efficient soaking.
The stainless steel rack has capacity to soak 516 strips.

NZ Made.

Check out our packages here, with everything you need to get started including these....

After the strips have been soaked, it is easy to lift out the rack full of strips and place in another 27 litre tub with drainer grate (751-0006)

After draining for 3 to 4 days, the rack can be added to a dry 27 litre tub, lid clicked on and taken away for inserting into beehives.

Very quick and efficient to use.

Click here to view our mixing guide for oxalic acid and glycerine

Get started with ease and precision! This DIY Swedish Cloth Kit includes everything you need to make your own Swedish cloths for use in your beehives. Perfect for hobbyist beekeepers, this kit comes with all the components and tools to simplify the process and ensure success.

Whether you're maintaining healthy hives or exploring innovative methods for pest control, this kit offers convenience and value, just like our popular Hobbyist Kit for Oxalic Acid (OA) treatments.

Click here for more info on the Swedish Cloths

Click here to view our instruction guide.

What’s Included in the Kit?

• Small Soak Tub: Perfect for preparing your Swedish cloths.
• 4-Litre Pail with Lid: For mixing and storage.
• 1.25kg Glycerine: High-quality glycerine for optimal absorption.
• 1.25kg Oxalic Acid (OA): Pure oxalic acid for effective results.
• 100 x Swedish Cloths: Ready to soak and use.
• 4 Ziplock Bags: Ideal for storing your prepared cloths.
• Digital Thermometer: Ensures precise temperature control during preparation.
• Wooden Trivet & Stirrer: Keep everything steady and well-mixed.
• Instruction Booklet: Easy-to-follow, step-by-step guide to ensure success.

Why Choose This Kit?

• All-in-One Solution: Save time gathering components; everything you need is included.
• Hobbyist-Friendly: Designed for small-scale beekeepers looking for cost-effective and reliable hive management solutions.
• Simple Instructions: Clear guidance to help you create Swedish cloths like a pro.

Click here to view the full instructions online and start your journey toward better beehive care today!

These sleeves protect your hiveware from the hot nozzle on the InstantVap.

Essential when working with Plastic or Polystyrene hiveware.

Also help to insulate the nozzle and avoid blockages

5 Pieces Supplied

Check out our InstantVap Operational Guide for more info

This silicone cover placed over the spout of the InstantVap can help to optimize the performance of the device. By covering the hot box at the top of the InstantVap, this cover aids in reducing heat loss, as well as containing any acid spills from the plunger.

Check out our InstantVap Operational Guide for more info

Easily restock your Swedish cloth supplies with this convenient Swedish Cloth Refill Kit. Designed for beekeepers who already have the tools, this refill pack includes the key components you need to keep your hives in top shape.

Remember to mix your solution 50/50 for these strips

Click here for more info on the Swedish Cloths

Click here to view our instruction guide.

What’s Included in the Refill Kit?

• 100 Swedish Cloths: Ready for soaking and use in your hives.
• 1.25kg Oxalic Acid (OA): Pure and effective.
• 1.25kg Glycerine: High-quality glycerine for optimal absorption.
• 4 Zip-lock Bags: For easy storage of the soaked strips
  

Why Choose This Refill Kit?

• Quick & Easy Restocking: Ideal for hobbyist beekeepers with an existing setup.
• Cost-Effective: Only the essentials—no extra tools or packaging.
• Hive Maintenance Made Simple: Keep your treatments going without interruption.

Keep your beehive care routine smooth and efficient with this refill kit. Pair it with your existing setup for continuous results!

These slide over the nozzle & block any accidental vapor leakage e.g. during transport.
Alternatively, cut off the end and use as a heavy duty sleeve on polyhives

Check out our InstantVap Operational Guide for more info

Acid Resistant Ziplock bag, perfect for storing 80 soaked cardboard strips.

The bag measures 305 x 440mm. 50 microns thick. Comes as singles or a pack of 100.

Once you have soaked your Beequip Strips, put them in these bags to keep it tidy and make them last longer.

InstantVap 12V Oxalic Acid Vaporizer
A premium-quality vaporizer, expertly manufactured in Europe.

Launched at the end of 2021, the InstantVap has quickly become a favourite among beekeepers in America and Europe. Now, Beequip is proud to bring it to New Zealand as the country’s exclusive distributor!

This 12V model comes with a 4m lead and alligator clips for easy connection to any standard 12V battery—making Varroa treatment simple and efficient for all beekeepers.

Check out our InstantVap Operational Guide for more info

We also sell these in a version that is powered by common 18 volt power tool batteries. Click Here   to view them on our website.

Respirators must be worn when vaporizing - Check out our range here

For a quick overview on the InstantVap, watch our video below:

Included with each Vaporizer:
1 x Vaporizer
1 x Plunger
1 x 500g of OA
2 x Silicone Caps
2 x Silicone Sleeves
2 x Spare O-Rings
2 x Cleaning Caps

The finer details:

• Power: 12V; 240W; 20A
• With a fully charged 80Ah deep cycle battery, ~300 hives can be treated with 2 grams of oxalic acid, one treatment takes approx. 20 seconds
• Stainless steel acid-resistant frame and dispenser
• Accurate, no-overrun dynamic solid-state relay PID temperature control; i.e. no overheating, no waiting for cool-down
• Real-time temperature display, controlled temperature, temperature can be individually adjusted from 100-240℃, default temperature: 230℃, recommended temperature: 220-230℃
• Fast, tool-free, roll-on adjustment of the oxalic acid dispenser, with 1-4 gram scale, dispensing oxalic acid with one push. Replacements or extras are available here They fit perfectly in the handle as well as in the dispenser chamber.
• 6mm diameter strong brass outlet pipe, not prone to clogging as there is no pipe bend. Easy to access and clean in case of a blockage, the entire length of the tube is accessible
• Requires a 7mm diameter hole in the hive wall. See the video above for a range of options for location of the application.
• There should be a minimum of 100mm free space in front of the nozzle otherwise some of the Oxalic will crystalize on the surface and be wasted.
• Stable in the hive hole, does not fall out or tilt sideways, can support its own weight (do not lean on it!)
  
• Voltage indicator to protect the battery. Periodic monitoring of the voltage indicator is necessary, because the battery must not be over discharged! The exact voltage value which the battery can be discharged to, is specified by the battery manufacturer. Please check the instructions for your battery.
• Can be used with a car starter battery for up to 100-150 hives
• Insulated furnace, works well in cold, windy weather.

Bare tub for sitting the soaker rack in and draining.

We recommend putting a drain grate in the tub to sit the crate on.

The all-new InstantVap® 18V TURBO has arrived — faster, smarter and more powerful than ever!

Building on the success of the Compact, the TURBO makes vaporizing oxalic acid (OA) in beehives even more efficient, with a high-power furnace, dynamic temperature control, and a smart LED interface for large-scale, reliable treatment.

NEW Turbo Design:
This model delivers quicker cycles (around 13 seconds per 2g dose) and precision control. With an easy-to-read LED display showing temperature, battery voltage, cycle counters and status lights, the Turbo is purpose-built for professional beekeepers needing speed in the field.

NEW LED display & counters
This includes live temperature and battery voltage, total cycles, cycles per battery, plus smart status light codes noted below: -
Slow blink = warming up, Solid = ready, Fast blink = vaporizing, Double blink + pause = low battery.

The Turbo combines strength and practicality — stainless-steel, acid-resistant frame, replaceable 6mm brass nozzle, double-wall furnace for cold/windy weather, and built-in over-discharge battery protection.

It is extremely cost-effective per application! Oxalic Acid costs less than 2 cents per hive for a 2 gram dose (based on bulk pricing). Treat thousands of hives for just a few dollars in materials.

Check out our InstantVap Operational Guide for more info.

The Vaporizer bowl temperature is very important to maximize the output of the Oxalic Acid without degrading it. Extensive lab testing shows that keeping the bowl temperature between 230 and 260 degrees Celsius is best:

Applications & suggested dose rates.

1. For beehives with solid bases, apply 2g of OA vapour at the bottom entry. Block the entry with a wet towel for 5–7 minutes.

2. For vented bases, use a vent blocker sheet, then follow the same process.

3. For hives with difficult-to-seal vented bases, apply 3g from the top via hive mat notch or excluder door/notch. See our stainless steel excluders with entry.

4. If the hive has a top feeder with a wooden rim, many beekeepers are applying the vapour through the rim directly below the feeder tray and into the bee space. Drill a 6.5mm hole in the rim on a slight downward angle to direct the vapour below the feeder tray. Plug with a golf tee or similar between treatments.

5. Through-the-wall dosing: drill a 6.5mm hole in the brood box and insert the brass nozzle. Plug with a golf tee or similar between treatments. It is best to locate the hole as high as possible at the side of the front plate so the vapour is directed alongside the outer frame. This method is the least most desirable of the 5 options.

NB. There should be 80mm to 100mm of free air space in front of the nozzle during discharge. Otherwise, 10% - 20% of the oxalic acid will solidify on a surface that is right in front and too close.

6 Amp/hr 18V Makita LXT Batteries also available here

Respirators must be worn when vaporizing — Check out our range here

Eye Protection must be worn.

Cleaning of these devices is important — Watch our Cleaning Video.

Included with each Turbo:
1 × InstantVap Turbo Vaporizer (choose your battery socket)
1 × Oxalic Acid Dispenser
1 × Cleaning Cap
2 × Spare O-Rings
Batteries not included

The finer details:

• Dynamic adjustable temperature: 230–260 °C (optimum 260 °C)
• Power: 18–20V; 400W; 22A
• Approx. 1Ah required for heating; each additional 1Ah = ~7 × 2g treatments
• ~13s per 2g dose at optimum temp
• Stainless-steel, acid-resistant frame & dispenser
• Roll-on dosing dispenser, 1–4g scale, one-press release (extras available here)
• 6mm brass outlet pipe, easy to clean, designed to resist clogging
• Stable in hive hole, supports its own weight
• 100mm free space in front of nozzle recommended
• Double-wall furnace for stable performance in cold, windy weather
• Built-in over-discharge battery protection (~15.2V)
• Weight: approx. 1.6kg
• Warranty: 1 year

The InstantVap Turbo is powered by common power tool batteries (choose one system at time of purchase):

• Makita LXT 18V
• Milwaukee M18
• Bosch ProCore 18V (Black & Red)
• Dewalt XR/FlexVolt 18–20V
• Metabo 18V
• AEG 18V 
• Ozito 18V

• Hikoki/Hitachi 18V

The device is compatible with only one type of battery. Please select carefully. Price does not include any batteries.

This large 304 grade stainless steel heated tank makes it nice and easy to liquify crystallized honey, or wax or anything that requires gentle heat!

The tank has an outer jacket which is filled with water or oil. The electric element heats the liquid in the outer jacket directly to provide a very safe and even heat to the contents inside the tank.

There are two size options to choose from: 
- 80 Litre
- 100 Litre

The tank can be heated close to 90 degrees. The tank has an outlet at the bottom. A ball valve comes as standard. You can also fit a honey gate, sold separately here.

The unit has an accurate and easy-to-use thermostatic controller. Adjustable from 30°C to 90°C where you set upper and lower limits. Simply set your upper and lower limit and the element will maintain the temperature between that setting. Once the jacket has heated to the desired temperature, the thermostat only supplies power to the heating element as it is needed to maintain the correct temperature.

Dimensions:- Both tanks are 510mm diameter plus any of the fittings on the side.  Height to the top of the tank:
80 Litre - 630mm.
100 Litre - 700mm

230 volt, 2000 watt.

Stay prepared with the Swedish Cloth Standard Kit, ideal for large-scale beekeepers or those looking for long-term hive maintenance solutions. This bulk kit includes everything you need to make thousands of Swedish cloths, ensuring your hives remain healthy and productive.

Remember to mix your solution 50/50 for these strips

Click here for more info on the Swedish Cloths

Click here to view our instruction guide.

What’s Included in the Standard Kit?

• 4000 Swedish Cloths: Ready for soaking and use in your hives.
• 50kg Oxalic Acid (OA): High-purity oxalic acid for effective treatments.
• 50kg Glycerine: Premium glycerine for optimal absorption.

Why Choose the Standard Kit?

• Bulk Supply: Perfect for commercial or large-scale beekeeping operations.
• Cost-Effective Solution: Buy in bulk and save.
• Reliable Hive Maintenance: Ensure continuous care for your hives.

This comprehensive kit is designed for serious beekeepers who want a ready supply of Swedish cloths to support their hive management needs.

NOTE: this may exceed our websites shipping capability. Please request a quote and we will get back to you as soon as we can.

This package has been specially set up for beekeepers who have bought the Plus package in the past or who wish to save money and buy bulk.

This package includes the following: -

80000 x Beequip strips
1250kg x Glycerine
850kg x Oxalic acid

Effective Cost per strip is 19 cents +GST total.

Bags to store soaked strips are available here.

Unfortunately this package may exceed the website shipping capacity - in this case simply request a quote from the cart page after adding it to your cart.

This package has been especially set up for beekeepers who have bought the Plus package in the past or who want to save money and buy bulk.

This package includes the following: -

16000 x Beequip strips
250kg x Glycerine
175kg x Oxalic acid

Effective Cost per strip is 20 cents +GST total.

Bags to store soaked strips are available here.

Unfortunately this package may exceed the website shipping capacity - in this case simply request a quote from the cart page after adding it to your cart.